Makita bubble blower

When I saw this liitle one from RobKre, I want it instantly :-)

I made it bigger. I made it 200% size on the turbine and the soap bowl, but also make the turbine to spin on M6x60 screw + nut and two 606-2RS bearings. I remake the bowl and tube to make stronger bindings, to fit the M6 screw and nut and the tube to fit on my Makita DUB362Z blower. I make the parts from different PLA color filaments, just to use the spares from my closet. Due to my errorI have 2 pieced bowl glued toogether and mine turbine doesn't have the screw head submerged into the turbine body, so, I unfortunately had to use longer screw, but the .stl files here are all fine.

Tube and turbine needs a support on baseplate only, bowl doesn't need one. I used 0,6 nozzle with 0,4 height on bowl and tube and 0,4 nozzle and 0,3 height on turbine

Here are those other non-PLA parts :-) :
- M6x60 screw
- M6 nut
- 6mm washer
- 3x wood screw 3,4x15mm or similar (3x12 should be good too)
- 2x 606-2RS bearings
- a lot of Bubble Blowing solution (there's no need to buy it, you can find a lot of recepies on Google)
- Makita DUB362Z 36V battery blower or similar one with 75mm (outside diameter) blower tube

VIDEO HERE: https://youtu.be/oCanO1Qmd4I

MAKE BUBBLES AND MAKE THE KIDS HAPPY

If you like my work, you can buy me a cofee or some fine creamy stout, anytime.
https://www.paypal.com/paypalme/kukibiker

-