Red Bull Lamp, Red Bull Lamp

Red Bull wall lamp

The bottom part is recommended to be printed in PETG and the top part in PLA, each piece is designed to be printed on a 220 x 200 surface.

It also comes with a free phone or tablet holder with the redbull logo.

When turned on it shows the silhouette of Checo Perez F1 car

Designed to be hung on walls or indoors using RGB LED strips.

Files with -1 must be rotated 180 about the "Y" axis to be printable without supports.

I optimized the figure for printing so that the led strips can be placed better and I added files in case you want the silhouette of the car not to come out

Red Bull wall lamp

The bottom part is recommended to print in PETG and the top part in PLA, it is designed to print each piece on a surface of 220 x 200

When you turn it on, the figures of F1 of Checo Pérez

It also has a gift support for phone or tablet with the redbull logo

Designed to hang on walls or indoors using RGB led strips

Files with -1 must be rotated 180 on the "Y" axis so that they can be printed without supports

I optimized the figure so that the led lights can be better placed and I added some parts in case they do not want to print the silhouette of the car

Layer high: .0.2 to 0.3

Speed. 40 to 50 mm/s

Nozzle: 0.4

Infill: 10%

Walls: 3