SquidGame LED Sign
SquidGame LED Sign
Published 2021-11-03T15:22:32+00:00
This is a LED Sign designed by PeopolyFlair. More Info, please visit:https://page.peopoly.net/flair
Here's the video introduce:https://www.youtube.com/watch?v=P1B6TEC6eQo
This model is only for personal use and not commercial use.
Slicer: Cura4.0+
Note:
When slicing, two sets of different slicing parameters need to be used, one set for side slicing, and one set for slicing bottom face plate and botton panel.
Nozzle Size: 0.4mm
Bottom/Face Model Slice Settings:
Top Thickness: 0
Top Layers: 0
Bottom Thickness: 0.8
Bottom Layers: 4
Infill Density: 0
Build Plate Adhesion Type: Skirt
Side Model Slice Settings:
Top Thickness: 0
Top Layers: 0
Bottom Thickness: 0
Bottom Layers: 0
Infill Density: 0
Build Plate Adhesion Type: Raft
Special Modes->Suface Mode: Surface
Mesh Fixes: Union Overlapping Volumes : True
Date published | 03/11/2021 |