PEM Tatcher Grenade Rainbow Six Siege - PEM Grenade

English:

Hello everyone! This time I bring you the TATCHER operator grenade from the Rainbow Six Siege game. The grenade is designed to light up when you turn the lid and turn on the front LEDs as the side LEDs, just like the real model in the game.

For this you will need the following:

• 17 blue 3mm LEDs

• 1 battery of 9v.

• 1 arduino nano CH3

• 3m UTP cable

• 6 screws M3x5mm black color

• 2 screws M2x5mm

• 1 small perforated bakelite insert

• 5 1k ohm resistors

• 12 resistors of 270 ohms

• 20cm of 1.4mm red wire

• 20cm of 1.4mm black wire

• 12 x 20cm dupont female 20cm female wires for arduino

• 1 dupont dupont connector strip for arduino

The code used in the Arduino Nano is inside the attached files in a file "Arduino CODE.txt".

The assembly process is on my Youtube channel, and I leave the direct link to the video so you can watch it:

https://www.youtube.com/watch?v=o8eX8-XFQqs

I hope you enjoy it

Greetings!!!

Español:

Hi everyone! This time I bring you the TATCHER operator grenade from the Rainbow Six Siege game. The grenade is designed to light up when you turn the lid and turn on the front LEDs as well as the side LEDs, just like the real model of the game.

For this you will need the following:

• 17 blue 3mm LEDs

• 9v battery.

• 1 arduino nano CH3

• 3m of UTP cable

• 6 M3x5mm black screws

• 2 M2x5mm screws

• 1 small perforated bakelite plate

• 5 resistors of 1k ohm

• 12 resistors 270 ohm resistors

• 20cm red cable 1.4mm

• 20cm of 1.4mm black cable

• 12 female-female dupont 20cm cables for arduino

• 1 dupont connector strip for arduino

The code used in the Arduino Nano is in attached files in "Arduino CODE.txt" file.

The assembly process is on my YouTube channel, and I leave the direct link to the video so that you can see it:

https://www.youtube.com/watch?v=o8eX8-XFQqs

I hope you enjoy it

Greetings!!!

English:

Print on any material (PLA, PETG, ABS) in BLACK color:

Body.STL

Cover.STL

Print in black color and TPU filament:

Leds.STL Cover

Internal Coil.STL

Print with TRASLUCID filament and in any material (PLA, ABS, PETG)

Diffuser of leds.STL

Parts that need brackets:

Body.STL

Cover.STL

Leds Cover.STL

English:

Print on any material (PLA, PETG, ABS) in BLACK color:

Body.STL

Cover.STL

Print in black and in TPU filament:

Leds.STL cover

Internal Coil.STL

Print with TRANSLUCENT filament and on any material (PLA, ABS, PETG):

Diffuser for leds.STL

Parts needing supports:

Body.STL

Cover.STL

Leds Cover.STL