Dragon Chess!: The complete set
$20.00 Dragon Chess!: The complete set
Published 2021-11-09T17:09:56+00:00
Dragon Chess! A comprehensive chess set comprising of 6 original dragon sculpts. Figures propotioned to allow for easy piece recognition and play.
Scaled to play on a board with 2.5inch (6.35cm) squares. The pieces will scale down to fit smaller boards. They are all highly detailed and can scale up to larger sizes should you just want to use it as an ornament.
The included models are:
1) The King (Dragon Overlord)
2) The Queen (Alien beauty dragon)
3) The Bishop (Two headed Wyvern)
4) The Knight (Dragon Horse)
5) The Rook (The Wyrm)
6) The Pawn (Baby Dragon)
The chess board was made by myself with wood and blood and tears :-)
This is the complete set available for single purchase - it's priced to be one dragon cheaper than if you buy the models separately.
Whilst designed to be printed on a resin printer, I have seen successful prints on FDM printers too but please read the printing details section for more information
Designed to be printed on a resin printer. Has been tested on the Prusa SL1 and the Elegoo Mars. I have printed successully with the base flat on the bed and with no supports - except for the knight which will require supports under his front hooves.
For each dragon I include the following files:
1) The dragon model as a solid. This is suitable for FDM printing and for resin printing, people can make their own decisions regarding hollowing and/or drain hole locations
2) The hollow shape and drain holes as subtractive shapes that I used. These can be used as a point of reference or just some ideas. You would need to subtract these from the solid.
3) The dragon model pre-hollowed with my shape and drain holes. This is suggested only with the model at the current scale and printed with the base flat on the bed and was successful with the Prusa SL1 and the Elegoo Mars. I do not guarantee success with other printer models and scales and you use these at your own risk.
Date published | 09/11/2021 |
Price | $20.00 |
Wyrm with two color sparkle filament printed on Sovol SV07 at high speed