Dream Castle Blocks, set 1

Small blocks to build a great castle. There are 5 types of blocks: straight walls, curve walls, straight long walls, towers and joints. A lot of diversity in each type - different reliefs, doors, windows, passages or stairs. Join them as you wish to create a wonderful castle.

The set 1 contains basic items: 4 types of straight walls (Ws), 4 types of curved walls (Wc), 2 types of straight long walls (WsL), 5 types of towers (T) and 6 types of joints (J: S, L, A, B, C, D).

There are 6 types of joints that enable assembly of walls and towers: S, L, A, B, C, D. Joints S (Small) and L (Large) are used to assemble walls with one another. Joints A and B are used for crossroads and tower's bases. Joints C and D enable 45 degrees crossroads. The purpose of each joint is explained on the screenshot (attached in the .zip file; highlighted colors help to recognize position of each joint in the structure: S (pink), L (purple), A(orange), B(red), C(yellow), D(green)).

Blocks are modular. Straight wall is 12 x 36 x 20 mm, curve wall is 36 x 36 x 20 mm, straight long wall is 12 x 47.9 x 20 mm; towers and joints A, B are 12 x 12 mm x different height.

Some photos in higher resolution:
4 gates castle
Big entrance castle
Three gardens castle view 1
Three gardens castle view 2
Three gardens castle view 3
Uncertain castle
Pirouette castle

The set 2 contains much more types of walls and towers, so you can build more diversified, exquisite castle. It is available here. A set 3 will be available soon.
You can check my instagram as an inspiration - I add there photos of structures built of my Dream Castle Blocks almost every day.

All items were 3Dprinted on Prusa MK3:
- in PLA (Colorfil silver / Plastspaw silver).
- No support is needed.
- Infill 15% rectilinear.
I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.

Printing Time:
~55' - straight wall
~1h - curved wall
~50' - tower
44' - 9x Joint L
23' - 9x Joint S
54' - 4x Joint A
1h22'- 4x Joint B

Note1: If you print multiply items, the printing time will be respectively shorter (than if you were printing each item one by one), e.g. 1x Ws1 takes 55', 2x Ws1 - only 1h22'.
Note2: Ws = straight wall, Wc = curved wall, WsL = straight long wall, T = tower, Tf = front tower, Tc = corner tower. Screenshots provide notation of each item.