Dream Castle Blocks, set 2

Small blocks to build a great castle. There are 5 types of blocks: straight walls, curve walls, straight long walls, towers and joints. A lot of diversity in each type - different reliefs, doors, windows, passages or stairs. Join them as you wish to create a wonderful castle.

This is the set 2. It contains: 8 types of straight walls, 6 types of curved walls and 4 types of towers. The set 1 is available here. It is for free and it contains basic items (different blocks than here). The set 3 will be available soon.

You can combine Dream Castle Blocks as you wish to create an exquisite castle. Thanks to modularity and diversity of items there are endless possibilities of arrangements.

The set also contains 6 types of joints that enable assembly of walls and towers: S, L, A, B, C, D. Joints S (Small) and L (Large) are used to assemble walls with one another. Joints A and B are used for crossroads and tower's bases. Joints C and D enable 45 degrees crossroads. The purpose of each joint is explained on the screenshot (attached in the .zip file; highlighted colors help to recognize position of each joint in the structure: S (pink), L (purple), A(orange), B(red), C(yellow), D(green)).

Blocks are modular. Straight wall is 12 x 36 x 20 mm, curve wall is 36 x 36 x 20 mm, straight long wall is 12 x 47.9 x 20 mm; towers and joints A, B are 12 x 12 mm x different height.

Some photos in higher resolution:
Ice Castle
Higher Tower Castle
Closed Castle
5 Dots Castle
Trellis Castle
Crab Castle
2 towers Castle view 1
2 towers Castle view 2
Garden Castle view 1
Witch Castle
You can check my instagram as an inspiration - I add there photos of structures built of my Dream Castle Blocks almost every day.

All items were 3Dprinted on Prusa MK3:
- in PLA (Colorfil silver / Plastspaw silver).
- No support is needed.
- Infill 15% rectilinear.
I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.

Printing Time:
~55' - straight wall
~1h - curved wall
~50' - tower
44' - 9x Joint L
23' - 9x Joint S
54' - 4x Joint A
1h22'- 4x Joint B

Note1: If you print multiply items, the printing time will be respectively shorter (than if you were printing each item one by one), e.g. 1x M1 takes 55', 2x M1 - only 1h22'.
Note2: Ws = straight wall, Wc = curved wall, WsL = straight long wall T = tower, Tf = front tower, Tc = corner tower. Screenshots provide notation of each item.