MINI MICRO CRAWLER AXIAL SCX24 HORSE VAN TRAILER

Based on my 2 axles trailer chassis, this trailer is a horse VAN with foldable rear gate.

I use to tow this trailer with my Axial SCX10 C10 or Jeep model.
The chassis has 2 leaf springs, articulated in the middle and which support at each end one axle.
It allows somme off road capability.

The Eyelet is designed to fit the NATO style hitch you can find in an other publication, specially prepared for SCX24 chassis.
the eyelet is adjustable to fit most of the mini crawler. You can adjust to your model and then glue the different parts or let it adjustable. In that last case you will have to tight the screws sometimes.

For screwing you need some 1.4mm diameter screws you can find on Ebay and 2 M2 screws for wheels.

Tires are 35mm :

Tires 35mm :Wltoys 1/24 RC ref A242-01

https://www.ebay.fr/itm/Wltoys-1-24-RC-Car-A242-Spare-Parts-4Pcs-Tires-A242-01/172428879402?ssPageName=STRK%3AMEBIDX%3AIT

Parts are not always located correctly on the bed for printing, you have to choose your favorite way to print the part and put the proper face on the bed in the slicer software.

December 2021
New tires as it seems previous ones were not anymore available
2.5 x 38mm wheels or 3 x 38mm wheels.
Tires will be removed from the rims and fitted on printed ones
New rim in the set of files Rim trailer 3 inner and outer

https://www.ebay.fr/itm/265356270308?var=565195318647
or on aliexpress
https://fr.aliexpress.com/item/1005003509430073.html?spm=a2g0o.9042311.0.0.2d966c37K8sP9N

.https://youtu.be/NOSwFSMgCSs

Nozzle 220°C
BED 60°C
Roof must be printed without support from the rear section onto the bed.
Sides are printed with the interior part on the bed