Skip to content

Lack Enclosure Ring Light (with Diffusers)

DIFFUSER_STRAIGHT.png Lack Enclosure Ring Light (with Diffusers)
LERL_Corner_Plug.png Lack Enclosure Ring Light (with Diffusers)
LERL_Straight.png Lack Enclosure Ring Light (with Diffusers)
DIFFUSER_CORNER_WITH_CORD.png Lack Enclosure Ring Light (with Diffusers)
DIFFUSER_CORNER.png Lack Enclosure Ring Light (with Diffusers)
LERL_Corner.png Lack Enclosure Ring Light (with Diffusers)
PXL_20211102_003332065.jpg Lack Enclosure Ring Light (with Diffusers)
DIFFUSER_CORNER_WITH_CORD.stl Lack Enclosure Ring Light (with Diffusers)
DIFFUSER_STRAIGHT.stl Lack Enclosure Ring Light (with Diffusers)
DIFFUSER_CORNER.stl Lack Enclosure Ring Light (with Diffusers)
LERL_Corner.stl Lack Enclosure Ring Light (with Diffusers)
LERL_Straight.stl Lack Enclosure Ring Light (with Diffusers)
LERL_Corner_Plug.stl Lack Enclosure Ring Light (with Diffusers)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1k views
  • 2 likes
  • 16 downloads
  • 1 comment
License
3D design format
STL Folder details Close
  • DIFFUSER_CORNER.stl
  • DIFFUSER_CORNER_WITH_CORD.stl
  • DIFFUSER_STRAIGHT.stl
  • LERL_Corner.stl
  • LERL_Corner_Plug.stl
  • LERL_Straight.stl

Learn more about the formats
Publication date 2021-11-17 at 00:04
?
Published to Thingiverse on: 2021-11-16 at 22:37
Design number 565125
Bad_Appleseed

Bad_Appleseed

3D printer file info

3D model description

Thanks to CRMoriarty for the original design.

To be clear the files included in my remix are the same as the original design BUT I have also added the files I made for the diffuser covers.

I printed CR\Moriarty's original design and glued the pieces together then screw mounted them in my enclosure. I then ran the LED's (also using hot glue to keep them up the adhesive on the back of the strip wasn't enough so they needed glue tacks) and then the wiring down the side of the table to the power, which is wired directly into my printer through a buck convertor.

Using transparent PTEG (I'm sure PLA also works fine) I printed the diffuser covers which will snap onto the original track without need of adhesive. They are tension mounted so they are tight but they will go on and they hook over the small inside lip on the inside of the track.

I needed diffusers because the light is above eye level near my desk and the unfiltered LEDs hurt my eyes. If your setup is below eye level you may not need these.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.