Skip to content

IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM

FundaBN.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
FundaBNMODELFRONT.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
FundaBNMODEL.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
FundaBN.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Funda-Movil_iPhone-13-Pro-Max.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Funda-Movil_iPhone-13-Pro-Max_Detalle-Camara.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Funda-Movil_iPhone-13-Pro-Max_Lateral.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Funda-Movil_iPhone-13-Pro-Max_Refuerzo-Camara.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Funda-Movil_iPhone-13-Pro-Max_Reverso.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
corte.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
cortesinmodelo.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
cortefundaCONARO.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
cortefunda.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
cortefunda2.jpg IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
CASEI13PM.stl IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
CASECOMPLETEi13PM.stl IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
RINGI13PM.stl IPHONE 13 PRO MAX CASE - ORIGINAL CAMERA PROTECTION SYSTEM
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.7/5 (5 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 14.1k views
  • 15 likes
  • 49 downloads
License
3D design format
STL Folder details Close
  • CASECOMPLETEi13PM.stl
  • CASEI13PM.stl
  • RINGI13PM.stl

Learn more about the formats
Publication date 2021-11-21 at 13:10
Design number 567724
SendraMaker3D

SendraMaker3D

3D printer file info

3D model description

**Original design, tested and verified.

iPhone 13 Pro Max case for printing with 95A flexible filament. It is a design with high protection due to its thickness (2 mm), which is MagSafe compatible.

The buttons (volume and side) areas are closed to prevent dirt from entering. In addition, the lightning connector (charging area) consists of a flexible lid for the same purpose.

Versions:

1- TWO-PIECE VERSION* (for textured bed). It consists of two parts: the case itself and a protective ring for the cameras, which has to be inserted through the slot in the case (no glue required). The file 'CASEI13PM.stl' has 'ears' in its design to avoid warping. Once printed, the 'ears' must be removed as well as the supports. This is better than using brim.

For further details on this version, please visit: https://youtu.be/tPwyEmR9ikc

**The two-piece, snap-on camera protection system (without glue) is an original SendraMaker creation. Do not accept copies.

2- ONE-PIECE VERSION. Consists of a single piece.

**Original design, tested and verified.

iPhone 13 Pro Max case for printing on flexible 95A. It is a design with high protection due to its thickness (2mm), which is MagSafe compatible.

The buttons (volume and side) are coated to prevent dirt ingress. In addition, the lightning connector (charging area) consists of a flexible cover for the same purpose.

Versions:

1- TWO-PIECE VERSION (for textured bed). It consists of two parts: the cover itself and a protective ring for the cameras, which must be inserted through the slot in the cover (no glue needed). The file "CASEI13PM.stl" has ears in its design to avoid warping. Once the part is printed, the ears must be removed as well as the brackets. This is better than using balsa.

For more details on this version: https://youtu.be/tPwyEmR9ikc

**The two-piece, snap-on camera protection system (without glue) is an original SendraMaker creation. Do not accept copies.

2- ONE-PIECE VERSION. It consists of a single piece.

3D printing settings

Infill: 50%.

Material: TPU 95A

Supports: Yes

Resolution: 0.2

Backfill: 50%.

Material: TPU 95A

Supports: Yes

Resolution: 0.2

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.