Sleigh christmas card kit 3d print

Santa sleigh for the reindeer that I made before.
https://www.thingiverse.com/thing:3213535

Card version size is same as reindeer card organized version, but it needs 3 cards.
About 1/20 scaled model of 2 sheet sleigh ^_^

For smooth assemble , print without burr as possible.
I print it with 75% Initial Layer Flow (Cura setting) for reduce burr of first layer.

[Card version]
For present.
3 cards, 148 x 78 x t1.4mm

[Print set]
For print without frame. Easy to layout .
2 sets. about 120 x 120mm

[Parts]
For one by one print.
side x 2
sheet_back x 1
sheet x 1
floor x 1
front-back_frame x 2
sleigh x 2
line x 2

[Assemble]
1. Insert sheet_back , sheet , floor , front-back_frame to one "side".

2. Insert another "side".
3. Slide "front-back_frame" and "sheet_back".
4. Add sleigh.

[Old version of my sleigh]
https://www.thingiverse.com/thing:3273319

[TIP]
Now "TIP DESIGNER" button in my profile page is activated ^_^
I am very happy even a few.

[Buy me a coffee]
Or buy me a cup of coffee from following adress.
https://www.buymeacoffee.com/shink

[Parts]
If you want to display with some LED lights please get it from here
[ eBay ] Christmas light

[Indoor]
Fairy lights 1-10M LED String Copper Wire Fairy lights For Christmas

[Outdoor]
Outdoor christmas lights led string 100M

[Printer]
If you are serching next printer ...
Eender-3 Pro
220x220x250mm Creality 3D
Eender-3 V2
220x220x250mm Creality 3D
CR-10S Pro V2
300x300x400mm Creality 3D

[Recommended nozzle]
V6 Nozzle
Trianglelab Top quality V6 Nozzle for 3D printers

[History]
11/14/2021 Fixed runner problem in Card1-3

-