Adjustable RIS rail mount for thermal camera with sight - Hikvision LYNX C06 and AGM asp160 version

This is my take on cheap thermal scope for Airsoft games - it has been in the making for around 6 months , I used it on small night CQBs and bigger milsims like Mission Afghanistan and Fedrunek in Poland.

It is durable and most importantly - holds the zero.
How to get sight
Hikvision thermal cameras do have kind of aiming reticle hidden in their option. To use it just switch to range finding mode - it will show T shaped reticle that wont turn off after few minutes.

Features:
-Elevation and windage adjustment
-opening for USB cable so you can charge the camera during game without taking it off the gun
-upper cover with button extensions
-STEP file for the cover - you can make your own versions (for example with RIS rail on top )

hardware needed :
- Ris mount uses long M4 screws (minimum 40mm lenght) but M3 will fit too!
-For connecting the RIS to main body use M6 screw ,40mm long minimum.
- Elevation is hold by single M4 screw (20mm +-) and superglue a nut at the bottom
-Horizontal adjustment is done by M4 screw (20mm long) and spring on the opposite side, for spring you can cut an old AEG spring
-Cover is mounted with M3 screw (35mm long, 40mm will fit too) and M3 nut.
- camera is mounted using tripod screw at the bottom

Print veritically with supports on.

For ris mount use strongest material you can get, 5 perimeters and 50%+ infill (grid is good)
For main body you can use PLA , same as RIS mount - 5 perimeters and at least 50% infill