Retro Rocketship Diorama

A little detailed diorama of a retro sci fi rocket ship on a crystal-rocky planet. I took the inspiration from retro sci fi posters on pinterest.
In the zip are include all the files in stl. There will be two bases, one has the shapes of rocks and crystals, the other hasn't them. It's up to you which one to print.
I printed mine with the same measures you find opening the file (12cm the lenght of the base).

Animation with better resolution:
https://www.youtube.com/watch?v=lKV-64ER6F0

If you have questions, write me. I'll be happy to help you.

Update:
I updated the model of the rocket, because it was difficult to print in small size. The original is still there i only added a simplified version.

These are the settings I used in cura. My printer is a FLSUN QQ-S pro.

Suggestions
To print at the best quality possible, print all models individually using RAFT. For the soil raft is not necessary.
The rocket is a bit difficult to print, i activated the Z Hop because when the printer is at the level of the wings, could bump a against them e crash the engines. It happened to me several times, my solution was slowing down and activating, like I said before, the Z Hop.
This solution in particular works for smaller prints, if you print it bigger, there shouldn't be problems

Quality
Layer quality: 0.1mm Rocket // 0.15 mm Soil // 0.06 Crystals and Rocks;
Wall line count: 2
Top & Bottom layers: 4

Infill
Infill: 5% Soil, Rocket;
Infill pattern: GRID

Temperatures
Printing temp: 196°
Build plate temp: 50°

Speed
Print speed: 70mm/s Soil, Rocket // 50mm/s Crystals and Rocks

Support
Support: YES

Filament
The Filament I used is the Giantarm PLA black 1,75