Gnosis of Zhongli -- Genshin Impact -- Geo Gnosis -- 3D Print Ready -- Chess Piece Rook

Introduction Video:
https://www.youtube.com/watch?v=AW2woi5XxRc

Genshin impact Zhongli's Gnosis. One piece, easy printable and print ready high detailed model. It can be usable both ornament or chess piece as a rook ( unfortunately we have to wait game's final form for full set :) )

--Dimensions--

İt has 3.5 x 3.5 x 10 cm sizes but you can easily rescale it what sizes you want.

--Recommended Printing Options--

I recommend minimum 3 walls and 10% or more infill rate for all parts. The lower layer heights will bring more detailed prints because it is a tiny and highly detailed figurine. I personally prefer 0.08m layer height on my FDM printer.
There is no support needed file and it can be print with no support but its shape is a bit more angled than original version. The choose is yours.
I also added "for_little_scales" files. For little scale prints, slicer programs sometimes couldn't see 8 little bridge at the top of gnosis and couldn't print it. In this file, the bridges were filled so there is no more chance of not being seen because of their thinness.

If you have any questions or requests, feel free to message me. I'll gladly help as much as i can.

don't forget to follow me on instagram! you could reach me on DM and follow my productions as well
@random_but_quality
https://www.instagram.com/random_but_quality

Also you can check my youtube channel! I upload short timelapse and long painting videos of my models
https://www.youtube.com/channel/UCc4OU7a-LyYRi3vMCHyvJPA/featured

--Recommended Printing Options--

I recommend minimum 3 walls and 10% or more infill rate for all parts. The lower layer heights will bring more detailed prints because it is a tiny and highly detailed figurine. I personally prefer 0.08m layer height on my FDM printer.
There is no support needed file and it can be print with no support but its shape is a bit more angled than original version. The choose is yours.
I also added "for_little_scales" files. For little scale prints, slicer programs sometimes couldn't see 8 little bridge at the top of gnosis and couldn't print it. In this file, the bridges were filled so there is no more chance of not being seen because of their thinness.