War Hammer AOS - 3rd Edition - Turn/Game Tracker

War hammer AOS game and victory point tracker for 3rd edition Age of Si gmar.

Compatible with the General's handbook pitched battles.

This tracker was designed specifically to print flat on smaller plate resin 3D printers such as Anycubic Photon Mono or Anycubic Photon Mono SE, but will fit flat on any plate larger than 120mm x 70mm, recommended at least 130mm x 80mm.

Flat print with groves for easy plate removal.

All components have tapered bottoms for easy plate removal.

Tracks command points, battle round number, victory points, battle tactic objective points and grand strategy points. Dice slots fit 12mm dice.

Also alows for tracking of battle tactics completed for battle plans that don't use victory points.

Holds a faction plate and faction name.

Large and small dials hold 2mm x 3mm magnets. This is recommended to hold dials in place.

STL's Included:

• AOS Tracker
• Primary Dial - Chaos
• Primary Dial - Death
• Primary Dial - Destruction
• Primary Dial - Order
• Secondary Dial - Battle Tactic VPs
• Secondary Dial - Battle Tactic Count
• Secondary Dial - Grand Strategy Status

Faction Icon and Name Plates available separately:

Rodross27

War Hammer AOS Faction Icons and Nameplates

• 4.3k views
• 11 likes
• 115 downloads
• 0 collections
• 0 comments
• 0 makes

Download Free

Printed on an Anycubic Mono SE:

Chitchubox settings:

Layer Height:0.05
Bottom Layer Count: 6
Exposure Time: 2
Bottom Exposure Time: 40
Light-off Delay:1
Bottom Light-off Delay: 1
Bottom Lift Distance: 8
Lifting Distance: 8
Bottom Lift Speed: 180 mm/min
Lifting Speed: 180 mm/min
Retract Speed: 240 mm/min

Resin: Anycubic plant based
About 30 mins for base and 50 mins for dials as seperate prints.

https://cults3d.com/en/3d-model/game/warhammer-40k-turn-tracker-9th-edition-mini-version