Guitar Holder Hanger for Electric Guitar

It's a stylish guitar holder, well suited for a stratocaster shape.
I wanted a guitar holder that had the "horns" matching the shape of the guitar head. My guitar sits straight with this holder and it is well supported.
It is made to hold a electric guitar(thinner body than an acoustic)
The design is inspired by old luxury furniture. The holder can be mounted with 3 countersink screws.
It's quite cheap to make, mine only took 45 grams of filament.
It was made by designing on top of a picture of my fender squier, and double checked by measurements.
I hope you like it!

P.S. The one in the picture was printed in gray PLA(I didn't have black) than I gave it 2 coats of black spraypaint.

I printed it in PLA
0.4 mm nozzle
0.2 mm layer height(you could use 0.12mm for better quality, I didn't because my printer is noisy :) )
204 C on the hotend and 55 on the bed
I used 80% infill because I get better looking parts that with 100%.
If you live in a hot enviroment or there will be a lot of direct sunlight shining on the holder I would recomend using PET-G(although I don't think you should store your guitar in direct sunlight)
Even thought I printed mine in PLA a year it is still plenty strong(I pulled down on the guitar pretty hard and nothing happened)

!!!You don't need any support for this model!!!
You can print it without a raft/brim.