Craycle Crow 750mm FPV Racer Plane STL Files

The Craycle Crow Racer FPV Drone is a 3D-printed RC model airplane suitable for Air Racing. This aircraft is designed to be compatible with the "DJI FPV Air Unit", "Caddx Vista" and "Analog FPV" systems, and new FPV Hatches will be available according to your demands.

The Crow Racer is a model that allows the camera to transmit images from the eyes of the pilot for a real racing experience and is also very securely guarded. Crow Racer supports 6S Lipo Battery thanks to its large loading area, so you can push the limits. FC zone is prepared for Matek and other flight control systems. You can use it on your autonomous flights. You can also place your GPS and Receiver modules inside the left and right sides of the wing.

An optional quick-release landing gear system is also available. It is the same as the landing gear of the Ranger V2. We do not recommend using landing gear for FPV and Racing, but if you are a beginner, you can use it for landing and safety. Crow has a two-color print design, you can paint your model by changing your filament for each piece and make your combination for your own Crow Racer. This also allows the model to be visible in the air. This is also very important for successful flights!

PDF Guide: http://bit.ly/pdfguidecrowracer

--- General Specs ---
Length : 520 mm
Wingspan : 750 mm
Print Weight : 214 gram
Flying Weight : 450-550 gram
Wing Area : 10 dm2
Wing Loading : 49.67 g/dm2
Airfoil : MH-24 9.01%
Minimum 3D Printer Size: 150x150x150 mm
Material: Regular PLA (LW-PLA Compatible)

--- Download Included ---
STL Files.
Cura Profile.
Ready to print G-code files (G-codes need min 180x180mm print area).
PDF User Guide (Detailed for assembling and printing).
Tech support.
Note: DJI Air Unit and Caddx Vista Canopies are not included in the files. Check the store to find Hatch Options. (Analog FPV Hatch included in the files. It has a 30mm FPV Camera Mount)

--- Required Electronics ---
4ch+ Radio / FPV System
2207 2400kv Brushless Motor
6040 Propeller
30A ESC
2200 mAh 4S-6S Lipo
3 pcs, 9g servos
Carbon Rods
Ø5x500 mm
(2x) Ø4x250 mm
(2x) Ø4x200 mm
Ø4x145 mm
CA Glue

Buy PowerPack: https://craycle.com/product/craycle-power-pack-crow/

Available Add-ons
Aileron Servo Mount: https://cults3d.com/en/3d-model/game/aileron-servo-mount-for-crow-racer-stl-file

Join the Facebook Craycle Crafter Group to see other people's builds and share your works. You can also ask for help from Craycle Community: https://bit.ly/craftergroup

Follow Instagram to be updated: https://bit.ly/craycleinstagram

Subscribe Youtube for Build/Fight videos: https://bit.ly/channel_sub

Please follow the instructions in the PDF User Guide.
Import Craycle Cura Profile: https://craycle.com/craycle-cura-profile/
0,4 nozzle
0,2 Layer Height
No Support
PLA/PETG/Nylon/LW-PLA
Heated Bed
Minimum 150x150x150 mm Bed Size