Retro Space Ork Gunwagon with Claws
Retro Space Ork Gunwagon with Claws
3D
Published 2021-12-28T11:06:17+00:00
An addition to my wife's retro 40K Rogue Trader and Second Edition Ork Speed Freekz army.
This is a 28mm compatible interpretation of the original Epic Ork "Gutrippa" gunwagon, built from scratch in Tinkercad.
Parts labelled with "x2" etc need to be printed that many times. The kit uses 5 short (15mm) and 1 long (30mm) peg; these are the same as 6mm dowels which nay be used instead. (I print the short ones but use dowels for the long pegs).
Two parts require a small amount of support: the periscope on the turret, and the larger pipe on the arms. The rest of those pieces do not require support if that option is available in your slicer. (I was using Cura blockers to limit supports to just those small areas).
Smaller parts may need brims depending on how good your adhesion is.
| Date published | 28/12/2021 |