Turn Tablel 3D scanning with smartphone

3D scanning with 3DF Zephyr: https://www.3dflow.net/3df-zephyr-free/

Everyone knows the prices of 3 D scanner.

Under 800 € there is nothing good and even over 800 € you are disappointed with the result !

With the free software from Zephyr succeed even for newcomers very good 3D objects that you can easily convert to a Stl file.

So you don't have to scan by hand with your smartphone, I designed this !

It may look simple but if you have ever looked around you will only find quite rash things that don't work or are very complex or filament consuming !

I offer here something that is easy to print,easy to assemble (6parts) and what little filament costs ! ( 52 - 152 grams)

Who wants to make only photos I recommend printing with the large turntable / disc !

Who also wants to make videos I empfehelele only the thin disc to print and buy a Elecktrischen turntable, with 18 cm diameter. eg at Amazone for about 20 €

In the pictures you will notice that I have changed the needle in the end so that it sits in front of the plate and not on it.

I use a 7 inch smartphone. ( Note 8 pro )

Just always take a photo and turn the dial one dash further until you get back to the starting point / dash.

Then repeat with the angle adapter !

And you're ready to process all the images into an STL using 3DF Zephyr.

My model is sufficient for up to about 10 cm high models.

In this video everything is well explained !

https://www.youtube.com/watch?v=a45bIbtLK1A&t=235s

Tip: if your phone does not quite fit from the dimensions, (height).

just put something under it ;)

Tip2: Color the plate matte green !

Tip3: Take background din a4 green paper( staple with tape)

Thank you and good luck !

---

3D scanning with 3DF Zephyr: https://www.3dflow.net/3df-zephyr-free/

Everyone knows the prices of 3 D scanners.

There is nothing good below 800 € and even above 800 € you are disappointed with the result!

With the free software from Zephyr, even newcomers can create very good 3D objects that can easily be converted to an STL file.

I designed this so that you don't have to scan by hand with your smartphone!

It may look simple, but whoever has already looked around will only find very thoughtless things that do not work or are very complex or filament-expensive!

I'm offering something lan that is easy to print, easy to assemble and that costs little filament! (52 - 152 grams)

If you just want to take photos, I recommend printing with the large turntable / disk!

If you also want to make videos, I recommend only printing the thin disk and buying an electronic turntable with a diameter of 18 cm. e.g. at Amazone for approx. 20 €

With the pictures you will notice that I finally changed the needle so that it sits in front of the plate and not on it.

I use a 7 inch smartphone. (Note 8 pro)

Just always take a photo and turn the turntable one line further until you have returned to the starting point / line.

Then repeat with the angle adapter!

And then you can process all images into an STL with 3DF Zephyr.

My model is sufficient for models up to approx. 10 cm high.

Tip: if your cell phone doesn't quite fit in terms of its dimensions, (height)

just put something underneath;)

Tip 2: color the plate matt green!

Tip 3: take the background of a4 green paper (staple with tape)

Thank you and good luck!

Standard 0.2

50 - 80 Speed

20 - 30% fill suffice

52 - 152 grams of pressure !