lamp with arduino led control kit/ lampe mit arduino led steuerung kit
lamp with arduino led control kit/ lampe mit arduino led steuerung kit
Published 2022-01-02T12:33:04+00:00
lamp with arduino led control kit.
glass can either be printed with transparent filament or milled out of 3 millimeter thick plexiglass with a cnc router using the included dxf file. when printing the glass, make sure that the filament runs from the bottom to the top to guide the light upwards. also, the glass should be hollow on the inside and the wall thickness should be 2 sheets. the kit can be ordered at https://pglu.ch/led-plexiglaslampe-bauen/.
lampe mit arduino led steuerung kit.
glas kann entweder mit transparenten filament gedruckt werden, oder mit der beiligenden dxf datei mit einer cnc fräse aus 3 millimeter dickem plexiglas gefräst werden. beim drucken des glases sollte darauf geachtet werden, das die filamentbahnen von unten nach oben laufen um das licht nach oben zu leiten. auch sollte das glas innen hohl und die wanddicke 2 bahnen betragen. der bausatz ist bei https://pglu.ch/led-plexiglaslampe-bauen/ zu bestellen.
Date published | 02/01/2022 |