Airsoft M16 fixed stock for M4 / AR-15 ASG - design for Double Eagle 904

I designed simple AIRSOFT M4/AR-15 stock - based on WWSD (What Would Stoner Do) and M16 fixed stock.
It was designed only to slide on standard length airsoft buffer tube (diameter 30mm or ca. 1.18").

4 parts inside - two "main" - stockTop and stockBottom, cube (as connector), and base plate.
Full length is kinda 265mm (10.4").

If the tolerances are fine on your printer - you don't even need to use glue - it should work - but if you're going to be using it in airsoft matches - I'd rather stick them together.

You need two metal screews to stick base plate to stockBot.

At the back there is hole - for sling, so if you want to attach it - you have to put it through it.

And no - i design it in TinkerCad - so i dont own any CAD files.

If you want to use this - remember that taking off stock for changing battery will be a little difficult - so i prefere to use longer battery wires or at least some extension, and only removing base plate.

Note - stock on pictures - is version v1 (without sanding, painting, and even attached base plate).
But version here is V2.
There are some differences. Mostly - V2 stock is shorter than V1... for like 25mm.
V3. Edited two parts - stockBot and basePlate. I added more storage space inside stock. Also - base plate - needed some fittings to new stock. Also now you can use sling hole and simple M-Lok pattern mount.

To print my version (PLA) i used setting like this:
every model is best printing orientation
10% to 20% infill, grid type,
5 walls, 5 top layers, 5 bottom layers,
44mm/s speed,
tree support.
And every part should be printed separetly.

Printing for me (with my settings took kinda 25h).