This is a simple holder for lens caps.

You can carry this on any camera strap up to 32 mm in width.

It is a very simple and quick print, perfect if you just need to finish up a spool or test a filament sample! You can also customize it with different colors to add some personal touch if you like :)

We have included different sizes:
- 43 mm
- 44 mm
- 49 mm
- 52 mm
- 58 mm
- 62 mm

To find the right diameter, look at the symbol ø in your lens!

Follow us / support

Did you like this design? Follow us on Instagram! We are @twothingies

If you really like what we are doing and want to support us, you could buy us a coffee or two!

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only.

If you would like to sell 3D prints of our designs in your store, you can join one of our KoFi membership tiers!

If you have other ideas, we would be happy to hear from you! Please send us a message here or on Instagram.

We printed this at 0.12 mm layer height, with a 0.4 mm nozzle (0.42 mm line width)

Enable ironing to get that smooth surface on the top layers.
Update 2024-02-05: if you use PrusaSlicer and the monotonic infill, there's no need for the ironing to get a very smooth top surface.

The print required no supports.

We used Polymaker's PolyTerra PLA Charcoal Black at 205 °C, 60 mm/s. It gives an amazing matte finish :)