mudguard kit m365 wheels 10 inches.Mudguard kit m365 wheels 10 inches

Solid base to wedge fenders to put 10-inch wheels and accommodate inside the connection of the rear light of the fender since it is much safer to prevent rubbing with the wheel (in my case I mount it on the xiaomi pro 2).

You need to pass the brake light cable through the right side looking at the scooter from behind.

You can use dupont male-female cables and put them with thermofuse and heat shrink for more watertightness.

If you want to use the same fender with the metal reinforcement brackets that come with some models, I drill a few millimeters to the left of the chassis so that the fender does not stick.

Replace longer screws.

1 (4x15mm)

2 (4x20mm)

Solid base to fit fenders when putting 10-inch wheels and house inside the connection of the rear light of the fender since this way it is much safer to prevent it from rubbing with the wheel (in my case I mounted it on the xiaomi pro 2) .

You need to pass the brake light cable through the right side looking at the scooter from behind.

You can use male-female dupont cables and put them with hot melt and heat shrink for more tightness.

If you want to use the same fender with the metal reinforcement brackets that some models bring, I will drill a few millimeters to the left of the chassis so that the fender does not stick.

Change longer screws.

1 (4x15mm)

2 (4x20mm)

Material :PET G--PLA

Density :50

Layer height :0.2

Supports : Yes