SUPPORT PLIANT POUR TELEPHONE SMARTPHONE OU TABLETTE - Motif : Geek Foldable support for mobile phone and small digital tablet - pattern : " Geek

This creation is a two-position smartphone or tablet holder, practical, light, easily unfolded, folded, lockable, fits in a bag or suitcase, resistant to handling and shocks and pretty to boot!

It proved to be so practical that it becomes a must-have item!

Little extra: a removable label allows you to customize it.

It is composed of 4 distinct parts:

- a base


- a back


- a face


- a removable label allowing to personalize it

This support allows the passage of the power wire for a possible loading.

A pin, present on the "Back" part, locks the whole in folded position. This pin will be adjusted with a cutter according to its exact position in relation to its housing on the front (depends on the precision and/or adjustment of the printer)

Object size :

Height: 15.5 cm

Width: 7 cm

Depth: 9.7 cm

Allowable phone thickness: 1.3 cm

This creation is a support for mobile phone or tablet with 2 positions. It is light, easy since both foldable/unfoldable, lockable, can be put in a bag or suitcase, handlings resistant and shockproof, and also attractive !

It is so convenient and handy that it becomes an everyday key item !

A little bonus : A removable label for more customization.

This project is part of the " Geek " topic.

It contains 4 separate parts. Those are as follows:

• a base

• a back

• a face

• a removable label for more customization

This support allows the cable to pass through for phone plugging for recharge if needed.

A lug placed at the back locks all the parts together when folded. This lug will be adjusted according to the place reserved for it on the face (depending of the precision and adjustments of the 3D Printer).

Model sizes :

Length : 15.5 cm (approx. 6.10 inches)

Width : 7 cm (approx. 2.75 inches)

Depth : 9.7 cm (approx. 3.82 inches)

Mobile phone acceptable thickness : 1.3 cm (approx. 0.51 inches)

The project was made with "PLA+ filament, 1.75mm SUNLU ".

- Nozzle temperature: 205°.


- Bed temperature: 60


- Filling: 100%.

Printing time:

- Base: 1h47 mn


- Back : 1h33 mn


- Front : 4h20 mn


- Label : 13 mn (The STL file corresponds to a blank label. It will be up to each person to personalize it via their favorite CAD software.

3D file format: STL

This project is made of filament "PLA+ Filament, 1.75mm SUNLU"

• Nozzle temperature: 205°.

• Bed temperature: 60°.

• Filling : 100

Printable time:

• Base : 1h47 mn

• Back : 1h33 mn

• Front : 4h20 mn

• Label : 13 mn (the STL file is a blank label. This is to be customized via a CAD software of your choice)

3d file format: STL