Lithophane holder lamp
Lithophane holder lamp
Published 2022-01-07T09:15:25+00:00
Made a simple holder for lithophanes that you can use led strips to power.
I used 3dp.rocks website to make the lithophane and set the max size to 100mm/ outer curved / 4mm thichness / Positive image.
Printed holder with 0.2mm layer and 15% infill.
Supplied my own lithophane soo people can compare and make the correct size.
I used 3v led strips that i can supply with 9v battery
PS. the lithophane will need to be either wedged to stay put or use a bit off hot glue on the backside to hold it in place in the frame.
Also supplied a version without cutouts for the lithophane soo that people can print the entire thing as one piece. To do this just move the lithophane soo that it touches the top of
the holder in your slicer.
I would recommend to have several prosesses so you can change the infill after need.
Date published | 07/01/2022 |
Support Free | YES |