Playmobil car workshop repair garage

This is a car workshop for your Playmobil city.
For all the necessary tune ups and car maintenance. With lifting platform that allows the mechanic to check/repair the car and complete the oil change.
This garage set also includes tools and equipment necessary to fix up your cars.
Set includes garage with lift, tools for repairs, gas can, water can, motor oil and funnel, tool cart, tunning pc, and other accessories.
You can download the tools from my "Playmobil Toolbox with Tools" set.
https://cults3d.com/en/3d-model/game/playmobil-toolbox-with-tools

If you have any questions please contact me.
I hope you will enjoy my creation! :)

PRINTED PARTS AND QUANTITIES

car_repair_base_v2 x 1
car_repair_equipment_funnel x 1
car_repair_equipment_gasoline_can x 1 (optional)
car_repair_equipment_gasoline_can_nozzle x 1 (optional)
car_repair_equipment_oil2 x 1 (optional)
car_repair_equipment_tester_pc x 1
car_repair_equipment_tester_pc_door x 1
car_repair_equipment_tester_pc_handles x 1 (both handles included in the file)
car_repair_equipment_tester_wheel x 2 (4 wheels included, print it for the tools chest and for the testing-pc)
car_repair_equipment_tool_chest x 1
car_repair_equipment_tool_chest_drawer x 2
car_repair_equipment_tool_chest_top_frame x 1
car_repair_equipment_water_can x 1
car_repair_leadscrew x 1
car_repair_leadscrew_base_top x 1
car_repair_leadscrew_cover x 1
car_repair_leadscrew_forks x 1
car_repair_leadscrew_gear x 1
car_repair_ramp x 2
car_repair_tools_cross_key x 1

POST PRINT

1) remove any supports
2) check if the parts fit together and sand where required (this step depends on your printer accuracy, layer height, and speed)
3) paint any parts you want, with acrylic colors
4) assemble the lifting platform, the testing-pc and the tool chest

PAINTING

First of all, sand and clean/wash all the parts that you want to paint.
Then use a primer/filler acrylic spray for better adhesion of the paint.
Wait one or two hours for the spray to dry.
Then apply the acrylic paint with a small brush.
To protect the acrylic paint from being removed by scratching, apply a clear varnish spray (gloss or matte).

LABELS

Print the labels sheet. Before cutting the labels cover them with a transparent adhesive tape, to protect them.
Then cut and glue the labels on the parts, as shown in the pictures.

Printer: Anet AM8 (custom)
Filament: Neema3d PLA White
Temperature: 210c
Bed Temp: 50c
Supports: Yes (parts and orientations are optimized for less supports)
Infill: 20%-30%
Top-bottom solid layers: 3
Perimeters: 2
Layer height: 0.3mm for the big parts, 0.2mm for the small parts
Speed: 3200mm/min