Skip to content

M41A Pulse Rifle

πŸ”« 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 23k views
  • 106 likes
  • 246 downloads
  • 2 collections
License
3D design format
ZIP Folder details Close
  • 200x200 cut pieces.zip
    • Remington/barrel remington cut 1.3mf
    • Remington/barrel remington cut 1.stl
    • Remington/barrel remington cut 2.3mf
    • Remington/barrel remington cut 2.stl
    • SPAS/cage 200 x 200 cut 2.3mf
    • SPAS/cage 200 x 200 cut 2.stl
    • SPAS/cage 200x200 cut 1.3mf
    • SPAS/cage 200x200 cut 1.stl
    • Thompson/stock curved. rear out 3mf.3mf
    • Thompson/stock curved. rear out.stl
    • Thompson/stock front cut.3mf
    • Thompson/stock front cut.stl
    • Thompson/stock rear curved in.3mf
    • Thompson/stock rear curved in.stl
    • Thompson/stock rear flat.3mf
    • Thompson/stock rear flat.stl
    • Thompson/thompson barrel cut -1.3mf
    • Thompson/thompson barrel cut -1.stl
    • Thompson/thompson barrel cut -2.3mf
    • Thompson/thompson barrel cut -2.stl
    • Thompson/thompson upper cut 200x200 -1.3mf
    • Thompson/thompson upper cut 200x200 -1.stl
    • Thompson/thompson upper cut 200x200 - 2.3mf
    • Thompson/thompson upper cut 200x200 - 2.stl
  • Aliens3-V2.zip
    • 3mf/8hole vent eta V2.3mf
    • 3mf/cameron 10 hole front plate (1).3mf
    • 3mf/ETA spas front V2.3mf
    • 3mf/Front ETA plate.3mf
    • 3mf/mag base eta no counter.3mf
    • 3mf/rear ETA plate.3mf
    • 3mf/rear plate shroud (1).3mf
    • 3mf/rear shroud clip lower (1).3mf
    • 3mf/shroud left ETA base V2.3mf
    • 3mf/shroud left ETA front V2.3mf
    • 3mf/shroud left ETA rear V2.3mf
    • 3mf/shroud right ETA base V2.3mf
    • 3mf/shroud right ETA front V2.3mf
    • 3mf/shroud right ETA rear V2.3mf
    • 3mf/stock eta v2.3mf
    • stl/8hole vent eta V2.stl
    • stl/cameron 10 hole front plate (1).stl
    • stl/ETA spas front V2.stl
    • stl/Front ETA plate.stl
    • stl/mag base eta no counter.stl
    • stl/rear ETA plate.stl
    • stl/rear plate shroud.stl
    • stl/rear shroud clip lower..stl
    • stl/shroud left ETA base V2.stl
    • stl/shroud left ETA front V2.stl
    • stl/shroud left ETA rear V2 (1).stl
    • stl/shroud right ETA base V2.stl
    • stl/shroud right ETA front V2.stl
    • stl/shroud right ETA rear V2.stl
    • stl/stock eta v2.stl
  • Remington.zip
    • 3mf/40 mm grenade 12g HE bottom (1).3mf
    • 3mf/40 mm grenade 12g HE cap.3mf
    • 3mf/40 mm grenade 12g HE inner button.3mf
    • 3mf/40 mm grenade 12g HE top.3mf
    • 3mf/Breech Assembly/breech bolt base.3mf
    • 3mf/Breech Assembly/breech bolt lock.3mf
    • 3mf/Breech Assembly/breech bolt.3mf
    • 3mf/Breech Assembly/extractor follower.3mf
    • 3mf/Breech Assembly/remington extractorHE.3mf
    • 3mf/Breech Assembly/spas pump handle connector .3mf
    • 3mf/Reciever/barrel HE.3mf
    • 3mf/Reciever/pump barrel cap.3mf
    • 3mf/Reciever/pump barrel.3mf
    • 3mf/Reciever/rear reciever panel.3mf
    • 3mf/Reciever/recieverHE.3mf
    • 3mf/trigger group/carrier stop.3mf
    • 3mf/trigger group/carrierv2.3mf
    • 3mf/trigger group/hammer pusher.3mf
    • 3mf/trigger group/hammer-v2.3mf
    • 3mf/trigger group/sear.3mf
    • 3mf/trigger group/trigger assembly left.3mf
    • 3mf/trigger group/trigger assembly right.3mf
    • 3mf/trigger group/trigger pin outer (1).3mf
    • 3mf/trigger group/trigger pin outer.3mf
    • 3mf/trigger group/triggerv2.3mf
    • stl/40 mm grenade 12g HE bottom (1).stl
    • stl/40 mm grenade 12g HE cap.stl
    • stl/40 mm grenade 12g HE inner button.stl
    • stl/40 mm grenade 12g HE top.stl
    • stl/Breech Assembly/breech bolt base.stl
    • stl/Breech Assembly/breech bolt lock.stl
    • stl/Breech Assembly/breech bolt.stl
    • stl/Breech Assembly/extractor follower.stl
    • stl/Breech Assembly/remington extractor.stl
    • stl/Breech Assembly/spas pump handle connector (1).stl
    • stl/Reciever/barrel HE.stl
    • stl/Reciever/pump barrel cap.stl
    • stl/Reciever/pump barrel.stl
    • stl/Reciever/rear reciever panel.stl
    • stl/Reciever/reciever.stl
    • stl/trigger group/carrier stop.stl
    • stl/trigger group/carrierv2.stl
    • stl/trigger group/hammer pusher.stl
    • stl/trigger group/hammer.stl
    • stl/trigger group/sear-.stl
    • stl/trigger group/trigger assembly left.stl
    • stl/trigger group/trigger assembly right.stl
    • stl/trigger group/trigger pin outer (1).stl
    • stl/trigger group/trigger pin outer.stl
    • stl/trigger group/triggerv2.stl
  • SPAS Cage.zip
    • 3mf/base for vent.3mf
    • 3mf/cage.3mf
    • 3mf/cage-thicker inner.3mf
    • 3mf/Please Read.txt
    • 3mf/spas 10 hole cameron front modified- for thicker spas cage.3mf
    • 3mf/spas pump handle connector - modified for thicker spas cage.3mf
    • 3mf/spas pump handle.3mf
    • stl/base for vent.stl
    • stl/cage.stl
    • stl/cage-thicker inner.stl
    • stl/Please Read.txt
    • stl/spas 10 hole cameron front modified- for thicker spas cage.stl
    • stl/spas pump handle connector modified for thicker spas cage.stl
    • stl/spas pump handle.stl
  • Shrouds and misc.zip
    • 1 piece shrouds/3MF/shroud left 8 hole one piece.3mf
    • 1 piece shrouds/3MF/shroud left cameron one piece round inner radius.3mf
    • 1 piece shrouds/3MF/shroud left cameron one piece square rear raduis.3mf
    • 1 piece shrouds/3MF/shroud right 8 hole one piece.3mf
    • 1 piece shrouds/3MF/shroud right cameron one piece round inner radius.3mf
    • 1 piece shrouds/3MF/shroud right cameron one piece square rear radius.3mf
    • 1 piece shrouds/STL/shroud left 8 hole one piece.stl
    • 1 piece shrouds/STL/shroud left cameron one piece round inner radius.stl
    • 1 piece shrouds/STL/shroud left cameron one piece square rear raduis.stl
    • 1 piece shrouds/STL/shroud right 8 hole one piece.stl
    • 1 piece shrouds/STL/shroud right cameron one piece round inner radius.stl
    • 1 piece shrouds/STL/shroud right cameron one piece square rear radius.stl
    • 10 hole CAMERON/3MF/10 hole shroud clip - left.3mf
    • 10 hole CAMERON/3MF/10 hole shroud clip - right.3mf
    • 10 hole CAMERON/3MF/10 hole vent.3mf
    • 10 hole CAMERON/3MF/cameron 10 hole front plate.3mf
    • 10 hole CAMERON/3MF/rear plate shroud.3mf
    • 10 hole CAMERON/3MF/rear shroud clip left.3mf
    • 10 hole CAMERON/3MF/rear shroud clip right.3mf
    • 10 hole CAMERON/3MF/shroud left cameron base - battery.3mf
    • 10 hole CAMERON/3MF/shroud left cameron front (repaired).3mf
    • 10 hole CAMERON/3MF/shroud left cameron rear - round rear inner.3mf
    • 10 hole CAMERON/3MF/shroud left cameron rear.3mf
    • 10 hole CAMERON/3MF/shroud right cameron base - battery.3mf
    • 10 hole CAMERON/3MF/shroud right cameron front.3mf
    • 10 hole CAMERON/3MF/shroud right cameron rear - round rear inner.3mf
    • 10 hole CAMERON/3MF/shroud right cameron rear.3mf
    • 10 hole CAMERON/3MF/spas 10 hole cameron front.3mf
    • 10 hole CAMERON/STL/10 hole shroud clip - left.stl
    • 10 hole CAMERON/STL/10 hole shroud clip - right.stl
    • 10 hole CAMERON/STL/10 hole vent thicker.stl
    • 10 hole CAMERON/STL/10 hole vent.stl
    • 10 hole CAMERON/STL/cameron 10 hole front plate.stl
    • 10 hole CAMERON/STL/front shroud block.stl
    • 10 hole CAMERON/STL/rear plate shroud (1).stl
    • 10 hole CAMERON/STL/rear shroud clip left (1).stl
    • 10 hole CAMERON/STL/rear shroud clip lower (1).stl
    • 10 hole CAMERON/STL/rear shroud clip right.stl
    • 10 hole CAMERON/STL/shroud counter cover.stl
    • 10 hole CAMERON/STL/shroud left cameron base - battery (1).stl
    • 10 hole CAMERON/STL/shroud left cameron front.stl
    • 10 hole CAMERON/STL/shroud left cameron rear.stl
    • 10 hole CAMERON/STL/shroud right cameron base - battery.stl
    • 10 hole CAMERON/STL/shroud right cameron front.stl
    • 10 hole CAMERON/STL/shroud right cameron rear.stl
    • 10 hole CAMERON/STL/spas 10 hole cameron front.stl
    • 8 hole ALPHA/3MF/8 hole shroud clip - right.3mf
    • 8 hole ALPHA/3MF/8 hole shroud clip left.3mf
    • 8 hole ALPHA/3MF/8hole vent ALPHA.3mf
    • 8 hole ALPHA/3MF/front plate.3mf
    • 8 hole ALPHA/3MF/front shroud block.3mf
    • 8 hole ALPHA/3MF/rear plate shroud.3mf
    • 8 hole ALPHA/3MF/rear shroud clip right.3mf
    • 8 hole ALPHA/3MF/shroud left ALPHA base - battery.3mf
    • 8 hole ALPHA/3MF/shroud left ALPHA front (repaired).3mf
    • 8 hole ALPHA/3MF/shroud left ALPHA rear - round rear inner.3mf
    • 8 hole ALPHA/3MF/shroud right ALPHA base - battery.3mf
    • 8 hole ALPHA/3MF/shroud right ALPHA front.3mf
    • 8 hole ALPHA/3MF/shroud right ALPHA rear - round rear inner.3mf
    • 8 hole ALPHA/3MF/spas front 8 hole.3mf
    • 8 hole ALPHA/STL/8 hole shroud clip - right.stl
    • 8 hole ALPHA/STL/8 hole shroud clip left.stl
    • 8 hole ALPHA/STL/8hole vent ALPHA.stl
    • 8 hole ALPHA/STL/cameron 10 hole front plate.stl
    • 8 hole ALPHA/STL/front shroud block.stl
    • 8 hole ALPHA/STL/rear plate shroud.stl
    • 8 hole ALPHA/STL/rear shroud clip left.stl
    • 8 hole ALPHA/STL/rear shroud clip right.stl
    • 8 hole ALPHA/STL/shroud left ALPHA base - battery (1).stl
    • 8 hole ALPHA/STL/shroud left ALPHA front.stl
    • 8 hole ALPHA/STL/shroud left cameron rear - round rear inner.stl
    • 8 hole ALPHA/STL/shroud right ALPHA base - battery.stl
    • 8 hole ALPHA/STL/shroud right ALPHA front (1).stl
    • 8 hole ALPHA/STL/shroud right cameron rear - round rear inner.stl
    • 8 hole ALPHA/STL/spas front 8 hole.stl
    • ETA - Aliens 3/3MF/8hole vent eta.3mf
    • ETA - Aliens 3/3MF/ETA spas front.3mf
    • ETA - Aliens 3/3MF/Front ETA plate.3mf
    • ETA - Aliens 3/3MF/mag base eta.3mf
    • ETA - Aliens 3/3MF/rear ETA plate.3mf
    • ETA - Aliens 3/3MF/shroud left ETA base - battery.3mf
    • ETA - Aliens 3/3MF/shroud left ETA front (repaired).3mf
    • ETA - Aliens 3/3MF/shroud left ETA rear.3mf
    • ETA - Aliens 3/3MF/shroud right ETA base - battery.3mf
    • ETA - Aliens 3/3MF/shroud right ETA front (repaired).3mf
    • ETA - Aliens 3/3MF/shroud right ETA front with cutout for counter.3mf
    • ETA - Aliens 3/3MF/shroud right ETA rear.3mf
    • ETA - Aliens 3/Please Read.txt
    • ETA - Aliens 3/STL/8hole vent eta.stl
    • ETA - Aliens 3/STL/ETA spas front.stl
    • ETA - Aliens 3/STL/shroud left ETA base remington and counter - battery.stl
    • ETA - Aliens 3/STL/Shroud left ETA front.stl
    • ETA - Aliens 3/STL/shroud left ETA rear.stl
    • ETA - Aliens 3/STL/shroud right ETA base remington and counter - battery.stl
    • ETA - Aliens 3/STL/Shroud right ETA front no cut out.stl
    • ETA - Aliens 3/STL/shroud right ETA front with cutout for counter.stl
    • ETA - Aliens 3/STL/shroud right ETA rear.stl
    • plates - mag bases/3mf/front shroud block.3mf
    • plates - mag bases/3mf/mag base thick.3mf
    • plates - mag bases/3mf/mag base thinner.3mf
    • plates - mag bases/3mf/magwell front plate.3mf
    • plates - mag bases/3mf/rear plate shroud.3mf
    • plates - mag bases/3mf/rear shroud clip left.3mf
    • plates - mag bases/3mf/rear shroud clip lower.3mf
    • plates - mag bases/3mf/rear shroud clip right.3mf
    • plates - mag bases/3mf/shroud counter cover.3mf
    • plates - mag bases/stl/cameron 10 hole front plate.stl
    • plates - mag bases/stl/front shroud block.stl
    • plates - mag bases/stl/mag base 10 hole and 8 hole.stl
    • plates - mag bases/stl/mag shroud base no electronics.stl
    • plates - mag bases/stl/rear plate shroud.stl
    • plates - mag bases/stl/rear shroud clip left.stl
    • plates - mag bases/stl/rear shroud clip lower.stl
    • plates - mag bases/stl/rear shroud clip right.stl
    • plates - mag bases/stl/shroud counter cover.stl
    • Rear Stocks/3mf/stock clamp.3mf
    • Rear Stocks/3mf/stock curved ETA.3mf
    • Rear Stocks/3mf/stock curved.3mf
    • Rear Stocks/3mf/stock flat.3mf
    • Rear Stocks/stl/stock clamp.stl
    • Rear Stocks/stl/stock curved ETA.stl
    • Rear Stocks/stl/stock curved.stl
    • Rear Stocks/stl/stock flat.stl
  • Thompson.zip
    • 3mf/barrel full length.3mf
    • 3mf/Frame V2.3mf
    • 3mf/magazine/copper coller for mag.3mf
    • 3mf/magazine/thompson magazine.3mf
    • 3mf/misc/thompson barrel choke.3mf
    • 3mf/misc/thompson grips/handle 7 stripe cameron left.3mf
    • 3mf/misc/thompson grips/handle 7 stripe cameron right.3mf
    • 3mf/misc/thompson grips/handle base 6 stripe left split.3mf
    • 3mf/misc/thompson grips/handle base 6 stripe right split.3mf
    • 3mf/misc/thompson grips/handle one piece 6 stripe.3mf
    • 3mf/misc/thompson grips/handle screw.3mf
    • 3mf/misc/vent and spas bracket holder.3mf
    • 3mf/thompson upper.3mf
    • 3mf/Trigger assembly/auto select lever (1).3mf
    • 3mf/Trigger assembly/Bolt charge lever.3mf
    • 3mf/Trigger assembly/buffer pad.3mf
    • 3mf/Trigger assembly/buffer pilot.3mf
    • 3mf/Trigger assembly/Pivot plate V2.3mf
    • 3mf/Trigger assembly/Safety latch.3mf
    • 3mf/Trigger assembly/sear cont.3mf
    • 3mf/Trigger assembly/Sear.3mf
    • 3mf/Trigger assembly/thompson bolt.3mf
    • 3mf/Trigger assembly/thompson disconnector.3mf
    • 3mf/Trigger assembly/thompson ejector claw.3mf
    • 3mf/Trigger assembly/thompson ejector pin.3mf
    • 3mf/Trigger assembly/Thompson mag release V2.3mf
    • 3mf/Trigger assembly/thompson rocker.3mf
    • 3mf/Trigger assembly/thompson trigger.3mf
    • 3mf/Trigger assembly/thompson trip.3mf
    • stl/barrel full length.stl
    • stl/Frame V2.stl
    • stl/magazine/copper coller for mag.stl
    • stl/magazine/thompson magazine.stl
    • stl/misc/barrel choke.stl
    • stl/misc/thompson grips/handle 7 stripe cameron left.stl
    • stl/misc/thompson grips/handle 7 stripe cameron right.stl
    • stl/misc/thompson grips/handle base 6 stripe left split.stl
    • stl/misc/thompson grips/handle base 6 stripe right split.stl
    • stl/misc/thompson grips/handle one piece 6 stripe.stl
    • stl/misc/thompson grips/handle screw.stl
    • stl/misc/vent and spas bracket holder.stl
    • stl/thompson upper.stl
    • stl/Trigger assembly/auto select lever (1).stl
    • stl/Trigger assembly/buffer pad.stl
    • stl/Trigger assembly/buffer pilot.stl
    • stl/Trigger assembly/Pivot Plate v2.stl
    • stl/Trigger assembly/Safety latch.stl
    • stl/Trigger assembly/sear cont.stl
    • stl/Trigger assembly/Sear.stl
    • stl/Trigger assembly/thompson bolt lever.stl
    • stl/Trigger assembly/thompson bolt.stl
    • stl/Trigger assembly/thompson disconnector.stl
    • stl/Trigger assembly/thompson ejector claw.stl
    • stl/Trigger assembly/thompson ejector pin.stl
    • stl/Trigger assembly/thompson mag release v2.stl
    • stl/Trigger assembly/thompson rocker.stl
    • stl/Trigger assembly/thompson trigger.stl
    • stl/Trigger assembly/thompson trip.stl
  • alternatives.zip
    • spas pump handle no holes.stl
  • electronics.zip
    • 3mf/auto select lever electronics.3mf
    • 3mf/barrel HE.3mf
    • 3mf/barrel thompson.3mf
    • 3mf/fake fire select end.3mf
    • 3mf/Frame electronics.3mf
    • 3mf/trigger assembly left.3mf
    • 3mf/trigger assembly one piece.3mf
    • 3mf/trigger assembly right.3mf
    • stl/auto select lever electronics.stl
    • stl/barrel HE.stl
    • stl/barrel thompson.stl
    • stl/fake fire select end.stl
    • stl/Frame electronics.stl
    • stl/trigger assembly left.stl
    • stl/trigger assembly one piece.stl
    • stl/trigger assembly right.stl

Learn more about the formats
Last update 2024-01-24 at 10:22
Publication date 2022-01-14 at 07:51
Design number 608027
PaulsBoutique

PaulsBoutique

3D printer file info

3D model description

Xenomorph infestation got you down ?
Time to print out some pulse rifles !!
Without a doubt the most comprehensive set of M41A pulse rifle files on the internet.

These files are 1:1 scale and include the following variations
- 10 hole Vent
- 8 hole Vent
- Aliens 3 vent
- 10 hole cameron shrouds
- 8 hole shrouds
- Aliens 3 shrouds and the option for a counter cutout or not
- 6 or 7 slot thompson grip
- 3 types of stocks 2 bent and one straight.

  • Fully moddeled thompson M1A1, true 1:1 scale
  • Fully moddled Remington 870, true 1:1 scale Both have the ability to be dry fired

Online store for electronics here:
https://www.etsy.com/au/shop/PaulsBoutique3d
I have static counters available.

Updates, instructions and version changes will always be here
https://www.paulsboutique3d.com/designs/m41a

Assembly vids at:
https://www.youtube.com/@paulsboutique3d/videos

Updates 04/10/2023
Redesign of Aliens3 Shrouds, stock, front Vent and SPAS block
In a separate folder called Aliens3-V2.zip

Updates 09/01/2023
improvement to the remington hammer
-the hammer follower as it wears tends to get stuck in the remington trigger assembly and locks up. This update fixes that.
reprint the hammer V2 in the remington zip - trigger group

Updates 11/11/2022
One piece shrouds added in the shrouds and misc zip
-8 hole
-10 hole original with a square inner rear radius
-10 hole with a more smoother rear radius

Updates 21/10/2022
One piece shrouds added for 10 hole cameron in shrouds and misc zip
V2 pivot plate and mag latch in thompson zip

Updates 06/10/2022
Found an error in the lower shrouds - Left side. Missing the cutout for the thompson mag lever.
Re-organised fileset so shroud sets are complete for each version and have split out the shroud plates and mag bases so you dont have to go digging for them. There is also a screw block for the front of the lower shroud to give it more strength - located in the shrouds and misc zip - "plates - mag bases", "front shroud block.3mf"

Updates 19/09/2022
Added 40mm grenades that fit the remington
one solid build and one with a removable cap
Located in the Remington.zip

***Updates 04/08/2022
Parts that were larger than a 200x200 print bed have been cut up and added to the 200x200 cut pieces zip

3D printing settings

files are optimised for 0.4 nozzle at 0.2 - 0.16 layer height
PLA, PLA+ - or what ever you are comfortable with

There is 0.2mm variation between surfaces of each file, so your printer needs to be printing well.

Printer size 300x 300x400 preferred
But can print on a 200x200 and just substitute the larger parts that have been cut up in the 200x200 zip

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.