Skip to content

Mega tree strip stabilizer

stip_stabilizer_V7.JPG Mega tree strip stabilizer
strip_stabilizer_for_1_inch_spacing.JPG Mega tree strip stabilizer
strip_stabilizer_install.jpg Mega tree strip stabilizer
strip_stabilizer_front_side.jpg Mega tree strip stabilizer
strip_stabilizer_back_side.jpg Mega tree strip stabilizer
strip_stabilizer_test_image_1.jpg Mega tree strip stabilizer
strip_stabilizer_for_1_inch_spacing_.png Mega tree strip stabilizer
strip_stabilizer_v7.stl Mega tree strip stabilizer
strip_stabilizer_wider_v8.stl Mega tree strip stabilizer
strip_stabilizer_for_1_inch_spacing_.stl Mega tree strip stabilizer
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.2k views
  • 2 likes
  • 34 downloads
License
3D design format
STL Folder details Close
  • strip_stabilizer_for_1_inch_spacing_.stl
  • strip_stabilizer_v7.stl
  • strip_stabilizer_wider_v8.stl

Learn more about the formats
Publication date 2022-01-16 at 00:03
?
Published to Thingiverse on: 2019-12-20 at 08:12
Design number 609430
skyjumpr

skyjumpr

3D printer file info

3D model description

This is a part designed to decrease the amount of flop and twist on large mega trees using the original Boscoyo strips. These can be added after pixels are inserted into strips, or slid into place as the pixels are being pressed into the strips. By removing one or two pixels at the desired location, the strip can be folded slightly to allow the strip to be inserted into the stabilizer. There is a photo included, kinda showing this. Once these parts are installed, just thread a length of 3/32 vinyl cable(1/8 diameter with vinyl included) through and use a couple of zip ties to keep it in place. You can either zip tie each strip to the cable or leave all but the ends free to float, allowing the tree to "breath".
This was designed for the original Boscoyo strips. These have been tested and confirmed to work on the new style strips as well. However there is now a version(8) that gives an added .02(.5mm) space for thicker strips or printers that don't hold tolerance as well. These fit between bullet pixels at 2 inch spacing.

September 9 of 2021, added stl for 1 inch spacing. This one is a little tricky to print without a brim, but with a solid first layer it can be done.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.