Eleni's Heart Box - 1/16/22

Eleni’s Heart Box – 1/16/22
Designed by JWizard

Thank you for choosing Eleni’s Heart Box!

Eleni’s Heart Box comes in all sizes. It can be used for many situations. It can be used for Valentines day, as a gift or storage box. No writing was put on this box to keep the emphasis on what is inside of the box.

Keep in mind that the bigger the box, the thicker and stronger it will be. All of our box designs are test printed to make sure the cover fits correctly on the box.

The following sizes have been tested:

100% is normal size of the .stl files that have been provided
75% of normal size (reduced size of top and bottom in slicer)
125% of normal size (increased size of top and bottom in slicer)
150% of normal size (increased size of top and bottom in slicer)

The following files are included:

heart box – top.stl
heart box- bottom.stl

Materials used to create model in photos:

Overture Matte White PLA
Esun Fire Engine Red PLA
Esun Silk Gold PLA
Veeology Silk Multi-Color PLA

Ideas:

This box can be scaled proportionally on all axes in respect to our test prints above. It is best to scale the x and y axes the same to not distort the box. You can also scale the z-axis separately to make the top and bottom of the box smaller or taller.

Any filament can be used and the box will look good. To add emphasis to the box you might wish to choose a shiny silk, multi-colored PLA filament. Our photos will give you an idea of what you can expect using different types of filament.

Conclusion:

Let us know how you like Eleni’s Heart Box. Please post your makes and share your comments! If you like decorative 3d boxes, please check out our other boxes on this website. Follow us so that you will be notified when we release our next project.
Thank you for your support,
JWizard

15% infill
No Supports