Skip to content

30K DEIMOS HIGH DETAILED INTERIOR RHINO

1a.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
9.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
7.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
6.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
4.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
5.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
10.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
11.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
12.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
Computer-Jumpseat-location-2.png 30K DEIMOS HIGH DETAILED INTERIOR RHINO
Computer-Jumpseat-location-4.png 30K DEIMOS HIGH DETAILED INTERIOR RHINO
Dozer-Blades.png 30K DEIMOS HIGH DETAILED INTERIOR RHINO
8.jpg 30K DEIMOS HIGH DETAILED INTERIOR RHINO
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.9/5 (7 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 49.1k views
  • 506 likes
  • 583 downloads
  • 25 collections
  • 14 comments
  • 11 makes
License
3D design format
ZIP Folder details Close
  • 30k Deimos Rhino with Interior.zip
    • Hull Center/Center Hull 1 NOSE CROSS HATCH FLOOR Seats DOWN.stl
    • Hull Center/Center Hull 1 NOSE CROSS HATCH FLOOR Seats UP and DOWN.stl
    • Hull Center/Center Hull 1 NOSE CROSS HATCH FLOOR Seats UP.stl
    • Hull Center/Center Hull 1 NOSE JUMP Seats DOWN.stl
    • Hull Center/Center Hull 1 NOSE JUMP Seats UP and DOWN.stl
    • Hull Center/Center Hull 1 NOSE JUMP Seats UP.stl
    • Hull Center/Center Hull 2 NOSE JUMP Seats DOWN.stl
    • Hull Center/Center Hull 2 NOSE JUMP Seats UP and DOWN.stl
    • Hull Center/Center Hull 2 NOSE JUMP Seats UP.stl
    • Hull Center/Center Hull 2 NOSE CROSS HATCH FLOOR Seats DOWN.stl
    • Hull Center/Center Hull 2 NOSE CROSS HATCH FLOOR Seats UP and DOWN.stl
    • Hull Center/Center Hull 2 NOSE CROSS HATCH FLOOR Seats UP.stl
    • Hull Sides/Track LEFT CROSS HATCH Floor JUMP Seat DOWNr.stl
    • Hull Sides/Track LEFT CROSS HATCH Floor JUMP Seat UPr.stl
    • Hull Sides/Track LEFT JUMP Seat DOWN.stl
    • Hull Sides/Track LEFT JUMP Seat UP.stl
    • Hull Sides/Track RIGHT CROSS HATCH Floor JUMP Seat DOWNr.stl
    • Hull Sides/Track RIGHT CROSS HATCH Floor JUMP Seat UPr.stl
    • Hull Sides/Track RIGHT JUMP Seat DOWN.stl
    • Hull Sides/Track RIGHT JUMP Seat UP.stl
    • Interiror Details/Bench Seats DOWN.stl
    • Interiror Details/Bench Seats MIX UP and DOWNt.stl
    • Interiror Details/Bench Seats UP.stl
    • Interiror Details/Computer Panel.stl
    • Interiror Details/Drivers Door JUMP seat DOWN.stl
    • Interiror Details/Drivers Door JUMP seat UP.stl
    • Interiror Details/Gun Rack LEFT.stl
    • Interiror Details/Gun Rack RIGHT.stl
    • Interiror Details/Jump Seat Computer DOWN.stl
    • Interiror Details/Jump Seat Computer UP.stl
    • Outside Details/Exhaust x4.stl
    • Outside Details/Grab Bar THICK if like me your printer is not as good.stl
    • Outside Details/Grab Bar THINNER If your prints work well.stl
    • Outside Details/Smoke Launchers.stl
    • Outside Details/Storage Box CROSS design.stl
    • Outside Details/Storage Box RECTANGLE design.stl
    • Doors TOP REAR and SIDE/Hinge Center x8.stl
    • Doors TOP REAR and SIDE/LEFT Top Door BLANK NO handle.stl
    • Doors TOP REAR and SIDE/LEFT Top Door BLANK WITH HANDLE.stl
    • Doors TOP REAR and SIDE/Rear Hatch RIBBED.stl
    • Doors TOP REAR and SIDE/Rear Hatch SMOOTH.stl
    • Doors TOP REAR and SIDE/RIGHT Top Door BLANK NO handle.stl
    • Doors TOP REAR and SIDE/RIGHT Top Door BLANK WITH HANDLE.stl
    • Doors TOP REAR and SIDE/SIDE BLANK door 1 of 2.stl
    • Doors TOP REAR and SIDE/SIDE BLANK door 2 of 2.stl
    • Dozer Blades/Dozer 5 teeth More square.stl
    • Dozer Blades/Dozer 5 teeth.stl
    • Dozer Blades/Dozer 6 teeth.stl
    • Dozer Blades/Dozer LemanRuss 5 teeth.stl
    • Dozer Blades/Dozer LemanRuss 6 teeth.stl
    • Dozer Blades/Dozer snow plough spikes.stl
    • Dozer Blades/Dozer snow plough.stl
    • Dozer Blades/Rake Inverse blades.stl
    • Dozer Blades/Rake New RT Longer blades.stl
    • Dozer Blades/Rake New RT.stl
    • Dozer Blades/Rake Old RT RT.stl
    • Hatches Coupolas/Hatch BLANK.stl
    • Hatches Coupolas/Hatch Holder Sensor LEFT.stl
    • Hatches Coupolas/Hatch Holder Sensor RIGHT.stl
    • Hatches Coupolas/Hatch with Bolter.stl
    • Hatches Coupolas/Hatch with Sensor.stl

Learn more about the formats
Publication date 2022-01-20 at 06:15
Design number 613887
Boredpilot

Boredpilot

3D printer file info

3D model description

This is a 30k Deimos Rhino, with extra Details inspired from the old RT era. All bolters eg on the cupola, under the computer/radar screen and in the Weapons Racks are Umbra pattern for the Heresy

So external details include extra studs, a Air scrubber/filtration its on the center hull at the back (inspired from the RT Rhino)

Internal details inspired from all the Jump seats and cubby holes we have on aircraft. So you will find multiple lights, jump seats for a full squad of 10, gun racks (they fit at the front both left and right sides, spare tracks both sides, tools both sides, (Chain sword and power axe located in the bench seating) power hammers both sides (For fixing of tracks as well as bashing other things). Computer screens/radar monitor, and multiple hatch locations including in the ceiling near the exit. And of course im safety first, so you will find the fire extinguisher is on the bench seating

Seating comes in multiple options with Jump seats UP/DOWN or a Mix thats on all the parts eg Track, Hull or the bench seating center section

The Hull both Track and center section have 2 different floor patterns to choose from either Parallel or Cross Hatch design

Outer detailing, working rear Hatch, side doors and top doors, including the cuopola hatches, and 2 versions of the grab bar, if your printer is good (mine a bit old so struggled a couple of times) use the thinner version, otherwise use the Thicker one

11 Dozer blades/Rakes to choose from

The Legion Iconography will be in separate designs, will start uploading them soon

The Top doors have options for with or without the RT style outside handles.

This should be the same footprint as a standard Rhino, I adjusted the outer tracks to be slightly sider and the center section to be slightly slimmer for a more aggressive look, and as you can see the way ive done the interior makes it look and feel way bigger then this round door to square door rubbish FW has.

The round circle doors have working Hinges, (RECOMMENDATION FOR ALL MY HINGE FITTINGS, warm the part with a hair dryer before putting the door/top cupola hatch into the hinge) Make sure the Hinge is clear of any flashing from the printing and once in place work the item a couple of times open and close to make sure its smooth. Fit the side doors in place with the hinges facing 90 degrees, after sanding if require (depends on how good your printer and resin are) apply a small amount of glue on each hinge and rotate them back onto the hull.

The side Tracks and Center Hulls are already hollowed with Vent holes. The side tracks alone have 10 (yes 10) drainage/vents to make your printing easier. the Center hull has 4 drainage/vents.

Every part shows no faults in Meshmixer no reverse faces etc
Made in both Meshmixer and Blender

I spent a long way way to long time on this one lol id say a minimum of 2 weeks on her. All parts I've tested and printed on a Epax X10 (Early one so no mono, no 2k screen etc and as its on a larger format the resolution is quite low)
The resin was the cheapest and being honest its also 1 year past expiry lol.

Please I want to see your prints of this one

Any issues let me know and ill see what I can do, please remember this is not my Job, so give me a couple of days to see the message depending on my shifts. Regards Boredpilot

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.