Dremel Bits Pegboard Organizer

I found and liked this thing by omribmr (https://www.thingiverse.com/thing:4581467) but wanted to make it work on my pegboard wall. This fits standard 1" pegboard walls, mine is a wooden/ParticleBoard style board. It attaches to 7 pegboard columns with a 2nd row below the hooks for support, in all this device covers 3 rows of peg holes. I attached a profile view of the results so you can see that it fits nice and flush with the pegboard itself. I'm quite pleased with how it turned out, printed with Siraya Tech Fast resin with 1.5mm walls and 20% infill. It came out to 15.753oz after sanding it but before putting a clear coat on it so its a substantial print but well worth it. I was almost able to get all of my bits i have currently loaded into this so i will be making another slightly different version of this to go along side this one.

I Sliced with Lychee using just a few main supports that branch off on the way down to minimize the resin i used. I've included that model with the supports that i used successfully on my Photon Mono X. This will not fit on some of the smaller form factor printers like the Photon Mono etc.

I also designed a version that works in a slatwall and posted that here, i did not print this as i made it for a friend, but i used a slatwall "hook" that i've successfully used in the past so i know it will work, the weight should not be an issue for that corner/connection.

-