Spirit Blossom Riven cosplay set

This is a set for cosplay of a character named Riven in Spirit Blossom skin from game League of Legends. The set include tiara, horn and earrings.

You can attach the tiara to your wig near the ponytail. You can also attach it to a hairband but probably you will need to heat the printed model to expand it a little bit for it.

The horn can be also attach to a hair band or to a wire or the wig itself.

Earrings have holes at the top of them so you can attach to them a casual earring or a tunnel (hole is perfect for a 6mm one) or a clip and attach them to you ear.

Feel free to ask me for an advice and describe how to do it if you have any problem with the models, printing or post-processing!

Tiara:
Dimensions: 149mm x 99mm x 17mm
On standard quality settings (0.2mm layer height, 20 infill density, cubic pattern) time of printing: about 4 hours an 28g of filament.
Support settings: normal, everywhere, zig zag pattern,45.0 overhang angle.

Horn:
Dimensions: 112mm x 50mm x 135mm
On standard quality settings (0.2mm layer height, 20 infill density, cubic pattern) time of printing: about 8 hours 50 minutes an 73g of filament.
Support settings: normal, everywhere, zig zag pattern,45.0 overhang angle

Earrings (remember to print two times, for both ears, time and filament for this one is calculated for one earring):
Dimensions: 80mm x 70mm x 15mm
On standard quality settings (0.2mm layer height, 20 infill density, cubic pattern) time of printing: about 2 hours and 14g of filament.
No need of support.