Skip to content

J7W1 Shinden (Scale Flying Aircraft 1000mm)

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.8k views
  • 2 likes
  • 6 downloads
License
3D design format
STL and ZIP Folder details Close
  • Elevon With support x2mirrior.stl
  • Front Canardx2 Mirrior.stl
  • Front Landing Gear Mount.stl
  • Fuselage1Left.stl
  • Fuselage1right.stl
  • Fuselage2Left.stl
  • Fuselage2right.stl
  • Fuselage3Left.stl
  • Fuselage3right.stl
  • Fuselage4Left.stl
  • Fuselage4right.stl
  • J7W1 Shinden Full Model Draft.stl
  • J7W1 Shinden V1.zip
    • Elevon With support x2mirrior.stl
    • Front Canardx2 Mirrior.stl
    • Front Landing Gear Mount.stl
    • Fuselage1Left.stl
    • Fuselage1right.stl
    • Fuselage2Left.stl
    • Fuselage2right.stl
    • Fuselage3Left.stl
    • Fuselage3right.stl
    • Fuselage4Left.stl
    • Fuselage4right.stl
    • J7W1 Shinden Full Model Draft.stl
    • Landing Gear Leg Longx3need1 mirrior.stl
    • Landing Gear Mount Wingx2 Mirrior.stl
    • motormount.stl
    • Shinden Propeller(1).stl
    • Shinden Vertical Stabilizerx2 Mirrior.stl
    • Side Vent x2 mirrior.stl
    • Stabilizer Wheelx2.stl
    • Static Propeller with spinner.stl
    • Tire.stl
    • Wheel Connection Slider.stl
    • Wheel Rim.stl
    • Wing Center Left.stl
    • Wing Center Right.stl
    • Wing External Left.stl
    • Wing External Right.stl
    • Wing Mid Left.stl
    • Wing Mid Right.stl
  • Landing Gear Leg Longx3need1 mirrior.stl
  • Landing Gear Mount Wingx2 Mirrior.stl
  • Shinden Propeller(1).stl
  • Shinden Vertical Stabilizerx2 Mirrior.stl
  • Side Vent x2 mirrior.stl
  • Stabilizer Wheelx2.stl
  • Static Propeller with spinner.stl
  • Tire.stl
  • Wheel Connection Slider.stl
  • Wheel Rim.stl
  • Wing Center Left.stl
  • Wing Center Right.stl
  • Wing External Left.stl
  • Wing External Right.stl
  • Wing Mid Left.stl
  • Wing Mid Right.stl
  • motormount.stl

Learn more about the formats
Publication date 2022-01-25 at 18:08
Design number 619112
The3vilRoYcE

The3vilRoYcE

3D printer file info

3D model description

J7W1 Shinden Scale Flying Aircraft 1000mm

This was considered a Japanese doomsday device, as an interceptor for bombers. Was one of the first ever front mounted Canard/Pusher aircraft. Only 2 of them ever made it to production and they never saw actual combat due to the war ending abruptly with the atomic bomb drops.

This is the first release of this air frame conversion, electronics are not yet compensated for in this build. This is a direct balsa to plastic conversion similar to the V1 Hellcat I have also completed in the same scale that seemed to generate a nice response from the public. All spars and formers are consistent at 4mm thick. This plane is scalable all the way down to 50% for those of you just wanting to make some nice static models, the smaller you go the harder the supports get to remove. I actually ran a 50% model shown in the photos above and it resulted in 500mm aircraft that weighs right around 100grams total. The intent of this project tho is to eventually get it RC ready. Which one could do pretty easily with this model if they have ever worked with balsa built planes, by adding electronic platforms and such into the fuse using wood or craft sticks, However... the moment I start making plotted electronic cut outs and such into the actual model it loses its scale ability. So that will be left for an unscalable V2 version. For print setting its a 1wall line, 2 bottom, 2 top, at 10-20% infill using only gyroid infill pattern, anything else would not be strong enough for this style of plane.

I hope you guys enjoy these projects, unfortunately with the time they are taking me to complete them, I can't keep posting them for free. I am going to continue making warbird frames in this style and scale tho as a collection sorts. If there are any particular warbirds you would like to see like this, please feel free to suggest them in the comments and I'll take them into consideration when choosing my next projects.

3D printing settings

10-20% gyroid infill 1 wall, 2 bottom, 2 top.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.