Articulated dragon robot with moving jaws!!
$4.40 Articulated dragon robot with moving jaws!!
3D
Published 2022-01-26T09:10:09+00:00
There's a lot of dragons out there these days, and i tought i would give it a try myself.
As a mechanical designer, i wanted something... mechanical of course! So here's the dragon robot with (tadaa!) moving jaws!!
Reaaaalllly flexible, strong joints, easy to print with a good surface contact with the bed.
You have two version:
-Complete, from head to tail
OR
-Complete without the top of the head (so you can print the top alone, because its the trickiest part of the print!) They will easily snap together after the printing is done. ;)
The actual size fits and ender 3 or a prusa mk3s bed. You can scale it if you want:
Smaller: Dont go below 60%, will be to fragile.
Bigger: No limits except your machine.
I have tried 0.15, 0.2, 0.24 and 0.3 layer height, and they work all fine.
Stringing can be an issue, but the print is pretty easy to do in general.
| Date published | 26/01/2022 |
| Price | $4.40 |
| Support Free | YES |
sweet print!!!