Shockmount for ZOOM ZDM-1 microphone

The final version is here. If you would need any edits or customisation for your microphone, you can DM me on Discord - Sidonius#6498

I wasn't able to find any models that would fit my idea of a shock mount, so I decided to design one from scratch. As I am not a professional designer, but only a rookie modeller, it took a lot of iterations to make my ideas work.

If you want to print and assemble this shock mount, you'll need

• M8 nut (for my mic arm)
• M4 screw approx 40mm long to connect the ring to the arm adapter (I only had some longer ones, so I shortened it with a grinder)
• M4 nut to secure it in place
• and most importantly you will need a flexible string to connect the microphone to the ring (I've got mine in the local store with fabrics) but it's just a regular 2mm thick rubber band covered in a black sheathing. -another M4 screw to secure the mount in place, I used M4x10mm.

I used black Creality PLA, on a modified Ender 3 v2 with a textured PEI surface (for a nice finish on the ring).
0.2mm layer height profile in Prusaslicer, but I used variable layer height as it decreases time and improves the quality of some parts.
For supports placement and print orientation, refer to the screenshots, I used custom painted supports that were needed for easier removal.