Eleni’s Heart of Glass/Stone Box – 1/29/22

Eleni’s Heart of Glass/Stone Box – 1/29/22
Designed by JWizard

Thank you for choosing Eleni’s Heart of Glass/Stone Box!

Eleni’s Heart of Glass/Stone Box comes in all sizes. For those who like a decorative box, this box will stand out! Many have created heart boxes, however none of them are like Eleni’s Heart of Glass/Stone. In addition to the beauty of this box, it be used to signify many emotions.

This box can be used to convey a broken or fragile heart. This box can express sadness or used to illustrate ones feelings to another. This box can serve as a reminder of a difficult time in ones life. No writing was put on this box to keep the emphasis on the box and it contents. You can print this on any 3d printer and obtain a different effect on a glass or metal bed.

This box will look good printed on any print bed. If you can print it on a glass bed, it will make the top and the bottom of the box look like glass! This is how we came up with the idea Heart of Glass! One or more of our photos were printed on a glass bed.

Keep in mind that the bigger the box, the thicker and stronger it will be. All of our box designs are test printed to make sure the cover fits correctly on the box.

The following size(s) have been tested:

normal size (11 cm wide approx.)
75% of normal size (9 cm wide approx.) scaled down in the slicer

The following files are included:

heart of glass box – top.stl
heart of glass box - bottom.stl

Materials used to create model in photos:

Veeology Silk Multi-Color PLA (printed on glass)
Eryone Silk Silver PLA
TTY Silk Coffee Gold PLA
Overture Matte Light Brown

Ideas:

This box can be scaled proportionally on all axes in respect to our test prints above. It is best to scale the x, y and z axes the same to not distort the box. Do not print this box too small or the pieces of the box many not be well connected. At 75% of the normal size is the smallest we could print the box with all the pieces of the heart box intact. If in fact you have a disjoint piece you can always use some clear silicon on that spot.

Any filament can be used and the box will look good. To add emphasis to the box you might wish to choose a shiny silk, multi-colored PLA filament. Our photos will give you an idea of what you can expect using different types of filament.

Conclusion:

Let us know how you like Eleni’s Heart of Glass/Stone Box. Please post your makes and share your comments! If you like decorative 3d boxes, please check out our other boxes on this website. Follow us so that you will be notified when we release our next project.

Thank you for your support,
JWizard

15%-20% infill
No Supports