Mike Tyson Ranch Marijuana Cannabis Rolling Tray

Tyson Ranch tobacco rolling tray. No supports needed. Easy supportless 3D print;

200mmx200mmx15.8mm full tray size,
130mmx190mm work area or for collecting fallen debris,
120mmx30mm smoking papers compartment, labelled "RAW",
1x DRAM 13 (labelled) Squeeze top pop medical pot holder (most popular size med pot),
6x 5mm to 10mm measuring holes or holders in 1mm increments (5,6,7,8,9, & 10mm),
1x Clipper lighter holder,
1x Zippo Petrol lighter holder,
1x Disposable generic lighter holder,
1x Popular size electric lighter holder. Can fit 4Smoke branded electric lighters,
1x 160mmx40mm Half-pipe rolling section on the centre of the work area.

Please see my other rolling trays I have for downloads by clicking on my profile.

Specifications of model:
Size: 200mm x 200mm x 15.8mm (Rescaling will lose the compartments snug fittings),
Print weight on Cura using the settings stated below: approximately 147 grams,
And Cura print time (Ender 5 Plus 40mm/s): approximately 19 hours and 13 minutes.

Settings (Cura 4.7 using an Creality Ender 5 Plus):
Nozzle size: 0.4
Layer height: 0.2
Initial layer height: 0.2
Wall thickness: 0.8
Wall line count: 2
Top/Bottom thickness: 0.8
Top thickness: 0.8
Top layers: 4
Bottom thickness: 0.8
Bottom layers: 4
Horizontal expansion: 0
Infill density: 25 (you can have a higher infill density for more strength)
Infill pattern: Cubic
Build plate adhesion type: Skirt
Generate support: no