Skip to content

gold rush MSI S7 Trommel G scale 1:22

DSCN0018.JPG gold rush MSI S7 Trommel G scale 1:22
DSCN0009.JPG gold rush MSI S7 Trommel G scale 1:22
9cebf4031c26a0154579fa6e1868face.png gold rush MSI S7 Trommel G scale 1:22
compleat_1-22.stl gold rush MSI S7 Trommel G scale 1:22
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.9k views
  • 14 likes
  • 118 downloads
License
3D design format
STL, TXT, and ZIP Folder details Close
  • compleat_1-22.stl
  • include.zip
    • Asteroid_Rock_Generator/attribution_card.html
    • Asteroid_Rock_Generator/files/asteroid.scad
    • Asteroid_Rock_Generator/files/rock 1 bottom 4.stl
    • Asteroid_Rock_Generator/files/rock 1 bottom 40x4.stl
    • Asteroid_Rock_Generator/files/rock 1 bottom.stl
    • Asteroid_Rock_Generator/files/rock 1 top 4.stl
    • Asteroid_Rock_Generator/files/rock 1 top 41x4.stl
    • Asteroid_Rock_Generator/files/rock 1 top.stl
    • Asteroid_Rock_Generator/files/rock 1.rsdoc
    • Asteroid_Rock_Generator/files/rock 1.stl
    • Asteroid_Rock_Generator/files/rock 2.stl
    • Asteroid_Rock_Generator/files/rock 3.stl
    • Asteroid_Rock_Generator/LICENSE.txt
    • Asteroid_Rock_Generator/README.txt
    • Ball_Valve/attribution_card.html
    • Ball_Valve/files/ball holder washer.stl
    • Ball_Valve/files/Ball_Valve-Ball remixed.stl
    • Ball_Valve/files/Ball_Valve-Handle remixed.stl
    • Ball_Valve/files/Ball_Valve-Holder remixed (repaired).stl
    • Ball_Valve/files/Ball_Valve-Housing.stl
    • Ball_Valve/files/Ball_Valve-Seal1 remixed.stl
    • Ball_Valve/files/Ball_Valve-Seal2 remixed.stl
    • Ball_Valve/files/Ball_Valve-Seal2 set remixed.stl
    • Ball_Valve/files/Ball_Valve-Union_Nut remixed.stl
    • Ball_Valve/files/Ball_Valve.stl
    • Ball_Valve/files/DSCN0016.JPG
    • Ball_Valve/files/DSCN0017.JPG
    • Ball_Valve/files/exploded diagram.stl
    • Ball_Valve/files/output tube.stl
    • Ball_Valve/files/project files/ball holder washer.amf
    • Ball_Valve/files/project files/ball holder.amf
    • Ball_Valve/files/project files/ball.amf
    • Ball_Valve/files/project files/Ball_Valve-Ball.stl
    • Ball_Valve/files/project files/Ball_Valve-Handle.stl
    • Ball_Valve/files/project files/Ball_Valve-Holder remixed.rsdoc
    • Ball_Valve/files/project files/Ball_Valve-Holder remixed.stl
    • Ball_Valve/files/project files/Ball_Valve-Holder.rsdoc
    • Ball_Valve/files/project files/Ball_Valve-Holder.stl
    • Ball_Valve/files/project files/Ball_Valve-Seal1.stl
    • Ball_Valve/files/project files/Ball_Valve-Seal2.stl
    • Ball_Valve/files/project files/exploded diagram.rsdoc
    • Ball_Valve/files/project files/handle.amf
    • Ball_Valve/files/project files/output tube.amf
    • Ball_Valve/files/project files/washer 1.amf
    • Ball_Valve/files/project files/washer 2 stem.amf
    • Ball_Valve/files/Thumbs.db
    • Ball_Valve/images/75fbb7f751dcbed3164815928ce30210_preview_featured.JPG
    • Ball_Valve/LICENSE.txt
    • Ball_Valve/README.txt
    • Centrifugal_water_pump_-_15%_bigger/12-4mm adapter.stl
    • Centrifugal_water_pump_-_15%_bigger/16mm elbow.rsdoc
    • Centrifugal_water_pump_-_15%_bigger/16mm elbow.stl
    • Centrifugal_water_pump_-_15%_bigger/3 way diverter.rsdoc
    • Centrifugal_water_pump_-_15%_bigger/3 way diverter.stl
    • Centrifugal_water_pump_-_15%_bigger/cap-10 (repaired).stl
    • Centrifugal_water_pump_-_15%_bigger/cap-10.STL
    • Centrifugal_water_pump_-_15%_bigger/foot valve box.stl
    • Centrifugal_water_pump_-_15%_bigger/foot valve foot.stl
    • Centrifugal_water_pump_-_15%_bigger/housing.rsdoc
    • Centrifugal_water_pump_-_15%_bigger/housing.STL
    • Centrifugal_water_pump_-_15%_bigger/impeller.STL
    • Centrifugal_water_pump_-_15%_bigger/mount.STL
    • Centrifugal_water_pump_-_15%_bigger/Thumbs.db
    • Centrifugal_water_pump_-_15%_bigger/washer.STL
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap 16mm out.stl
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap imperial.scad
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap metric.scad
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap nut.stl
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap.scad
    • Centrifugal_water_pump_-_15%_bigger/water resavore tap.stl
    • Centrifugal_water_pump_-_15%_bigger/water resavore washer.stl
    • Centrifugal_water_pump_-_15%_bigger/water tap washer.amf
    • compleat 1-22.rsdoc
    • grizzly bars/grizzly bars 1-22.rsdoc
    • grizzly bars/grizzly bars 1-22.stl
    • grizzly bars/grizzly bars diagram.stl
    • grizzly bars/grizzly bars hinge pin.stl
    • grizzly bars/grizzly bars hinge.stl
    • grizzly bars/grizzly bars wall extentions.stl
    • pictures/compleat 1-22.stl
    • pictures/DSCN0009.JPG
    • pictures/DSCN0018.JPG
    • pictures/special instructions.txt
    • rooler motor/roller motor block no hydrolic motor.stl
    • rooler motor/roller motor diagram.stl
    • rooler motor/roller motor.rsdoc
    • rooler motor/rooler motor block.stl
    • rooler motor/rooler motor shaft.stl
    • rooler motor/rooler motor wheel.stl
    • shaker deck parts/floor pt 1.stl
    • shaker deck parts/floor pt 2.stl
    • shaker deck parts/motor bracket.stl
    • shaker deck parts/shaker deck 1-22.rsdoc
    • shaker deck parts/shaker deck part1.stl
    • shaker deck parts/shaker deck pt 2.stl
    • shaker deck parts/shaker deck spray bars bar to distrupition elbow.stl
    • shaker deck parts/shaker deck spray bars cleat suport.stl
    • shaker deck parts/shaker deck spray bars diagram.stl
    • shaker deck parts/shaker deck spray bars distribution tube.stl
    • shaker deck parts/shaker deck spray bars distrubition elbow.stl
    • shaker deck parts/shaker deck spray bars sprayer rise suport.stl
    • shaker deck parts/shaker deck spray bars tube 12mm hose.stl
    • shaker deck parts/shaker deck spray bars tube 12mm splice joint.stl
    • shaker deck parts/shaker deck spray bars.rsdoc
    • shaker deck parts/shaker deck spray bars.stl
    • shaker deck parts/shaker deck spring pin set.stl
    • shaker deck parts/shaker deck spring pin.rsdoc
    • shaker deck parts/shaker deck spring pin.stl
    • shaker deck parts/shaker motor.rsdoc
    • shaker deck parts/shaker motor/DSCN0366.JPG
    • shaker deck parts/shaker motor/DSCN0367.JPG
    • shaker deck parts/shaker motor/hobby motors/motor full round.rsdoc
    • shaker deck parts/shaker motor/hobby motors/motor small half round.rsdoc
    • shaker deck parts/shaker motor/shaker motor box.stl
    • shaker deck parts/shaker motor/shaker motor cover r130 motor.stl
    • shaker deck parts/shaker motor/shaker motor cover r260 motor.stl
    • shaker deck parts/shaker motor/shaker motor diagram.stl
    • shaker deck parts/shaker motor/shaker motor weight large.stl
    • shaker deck parts/shaker motor/shaker motor weight small.stl
    • shaker deck parts/shaker motor/Thumbs.db
    • shaker deck parts/shaker spring.rsdoc
    • shaker deck parts/sluth spray bar elbow.stl
    • shaker deck parts/Thumbs.db
    • shoots/shoot shaker pt1.stl
    • shoots/shoot shaker pt2.stl
    • shoots/tromel shoot 1-22.rsdoc
    • shoots/tromel shoot diagram.stl
    • shoots/trommel to sluth box shoot 1-22.rsdoc
    • shoots/trommel to sluth pt 1.stl
    • shoots/trommel to sluth pt 2.stl
    • side frame/door 1-22.rsdoc
    • side frame/frame i beem joint 15.stl
    • side frame/frame i beem joint 30.stl
    • side frame/frame i beem joint.rsdoc
    • side frame/frame i beem joint.stl
    • side frame/I Beem 90 deg single 18.stl
    • side frame/I Beem 90 deg single 8.stl
    • side frame/I Beem 90 deg single.stl
    • side frame/I Beem conectors.rsdoc
    • side frame/side frame 1-22.rsdoc
    • side frame/side frame 1.stl
    • side frame/side frame 2.stl
    • side frame/side frame 3.stl
    • side frame/side frame 4 lower.stl
    • side frame/side frame 4 upper.stl
    • side frame/side frame 5 lower.stl
    • side frame/side frame 5 upper.stl
    • side frame/side frame cross member.stl
    • side frame/side frame cross tie 2.stl
    • side frame/side frame cross tie 8.stl
    • side frame/side frame cross tie.stl
    • side frame/side frame diagram.stl
    • sluth parts/man.stl
    • sluth parts/run extention.stl
    • sluth parts/run left start.stl
    • sluth parts/run middle start.stl
    • sluth parts/run right start.stl
    • sluth parts/sluth 1-22.rsdoc
    • sluth parts/sluth diagram.stl
    • sluth parts/sluth frame pt 1.stl
    • sluth parts/sluth frame pt 2.stl
    • sluth parts/sluth frame pt 3.stl
    • sluth parts/sluth spray bar 2.stl
    • sluth parts/sluth spray bar 3.stl
    • sluth parts/sluth spray bar elbow.stl
    • sluth parts/sluth spray bar joint.stl
    • sluth parts/sluth spray bar mount bracket.stl
    • sluth parts/sluth spray bar.rsdoc
    • sluth parts/sluth suport frame.rsdoc
    • sluth parts/Thumbs.db
    • stair parts/stairs 1-22 bottom.stl
    • stair parts/stairs 1-22 top.stl
    • stair parts/stairs 1-22.rsdoc
    • stair parts/Thumbs.db
    • Thumbs.db
    • trommel raise frame/cross i beem 6.stl
    • trommel raise frame/cross i beem.stl
    • trommel raise frame/raise frame diagram.stl
    • trommel raise frame/Thumbs.db
    • trommel raise frame/trommel raise frame.rsdoc
    • trommel raise frame/trommel raise frame.stl
    • tumbler parts/cylinder bottom.stl
    • tumbler parts/cylinder top top w guide ring.stl
    • tumbler parts/cylinder top.stl
    • tumbler parts/diagram.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/chain.scad
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/chain_example_all.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/example_1.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/example_2_snap_fit.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/example_3_strong.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/example_4_strong_snap.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/example_5_big_chain.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/gear_20_teeth.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/gear_8_teeth_motor_mount.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/gear_9_teeth.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/gear_big_15_teeth.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/test_chain.scad
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/trommel drive motor gear.scad
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/trommel drive motor gear.stl
    • tumbler parts/Drive_Chain_fully_parametric/Drive_Chain_fully_parametric/trommel tumbler gear.scad
    • tumbler parts/gm9 motor.rsdoc
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/backlash_option_demo.stl
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/bevel_gear_pair.rsdoc
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/bevel_gear_pair.stl
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/complex_spur_gear_test.stl
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/meshing_double_helix.stl
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/parametric_involute_gear_v4.0.scad
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/parametric_involute_gear_v5.0.scad
    • tumbler parts/Parametric_Involute__Bevel_and_Spur_Gears/Parametric_Involute__Bevel_and_Spur_Gears/simple_test.stl
    • tumbler parts/post half 8.stl
    • tumbler parts/post half connector.stl
    • tumbler parts/post half connectors 8.stl
    • tumbler parts/post half.stl
    • tumbler parts/ring screen.stl
    • tumbler parts/screen.stl
    • tumbler parts/Thumbs.db
    • tumbler parts/trommel drive chain/chain fixed 3.stl
    • tumbler parts/trommel drive chain/chain fixed 32 links.stl
    • tumbler parts/trommel drive chain/chain fixed.rsdoc
    • tumbler parts/trommel drive chain/chain fixed.stl
    • tumbler parts/trommel drive chain/chain.stl
    • tumbler parts/trommel drive chain/gm9 motor gear.amf
    • tumbler parts/trommel drive chain/gm9 motor gear.rsdoc
    • tumbler parts/trommel drive chain/gm9 motor gear.stl
    • tumbler parts/trommel drive chain/Thumbs.db
    • tumbler parts/trommel drive chain/trommel drive motor gear fixed.stl
    • tumbler parts/trommel drive chain/trommel drive motor gear.stl
    • tumbler parts/trommel drive chain/trommel motor gear.amf
    • tumbler parts/trommel drive chain/trommel tumbler gm9 motor mount diagram.stl
    • tumbler parts/trommel drive chain/tumbler gear.stl
    • tumbler parts/trommel tumbler gm9 motor mount.rsdoc
    • tumbler parts/trommel tumbler gm9 motor mount.stl
    • tumbler parts/trommel tumbler motor mount pt 1.rsdoc
    • tumbler parts/trommel tumbler motor mount pt 1.stl
    • tumbler parts/tumbler diagram.stl
    • tumbler parts/tumbler gm9 motor mount diagram.stl
    • tumbler parts/tumbler screen.rsdoc
    • tumbler parts/tumbler spray bar 1.stl
    • tumbler parts/tumbler spray bar 2.stl
    • tumbler parts/tumbler spray bar 3.stl
    • tumbler parts/tumbler spray bar 4.stl
    • tumbler parts/tumbler spray bar bar L joint L.stl
    • tumbler parts/tumbler spray bar front frame suport.stl
    • tumbler parts/tumbler spray bar joint.stl
    • tumbler parts/tumbler spray bar L joint R.stl
    • tumbler parts/tumbler spray bar rear frame suport.stl
    • tumbler parts/tumbler spray bar.rsdoc
    • tumbler parts/tumbler.rsdoc
  • special_instructions.txt

Learn more about the formats
Publication date 2021-05-02 at 02:22
?
Published to Thingiverse on: 2018-05-07 at 13:54
Design number 416612
ajory

ajory

3D printer file info

3D model description

parts needed

i do not have a power box for this yet have a idea where i want it but have not started on it as yet i want to start on the radial stacker before the power box so essentially this thing is done for now

1 12v battery
about 4 switches
1 gm9 hobby gear box single shaft preferable but will fit a dual shaft box
8 23/64x1-3/8 springs
3 hobby motors numbers are in the shaker motor folder
1 12v marine water pump
1 LM2596 DC-DC convert to convert 12v battery to 3v for shaker motors

for dry play you can use kitty litter this works realy well through the system

for dry and wet play i recommend plastic pellets again i think catgenie pellets would work perfectly and it is multiple colors to resemble pay dirt i am going to use all my recycled abs with my pelatizer to make pellets and rocks and i might buy some catgenie pellets

included is a rock generator for open scad to make small rocks larger than the screens to demonstrate the separation out the front of this thing

this tromell is designed to be taken apart so only glue parts described below
all diagrams are in the parts folders

for glue i use acetone to combine all parts esp the spray bars this makes these water tight

print stair parts and glue together use heat shrink tubing to connect the rails

print frame parts and glue according to diagram using I Beam joints make 2 frames

print 12 cross I Beams

print 24 90deg I Beam connector

print tumbler parts glue all parts except drive gear use 4 small grub screws to lock this down

print tumbler spray bars parts glue together do not glue the support arms to the spray bars glue the back support to the shaker shoot according to the diagram

print the tumbler screens using PLA

print all shoot parts and glue half's together

in this folder print shaker motors you will nead 3 of these

print 2 roller motor blocks with hydrolic motor and 2 motor blocks with out hydrolic motor
just press fit the rollers to the blocks with the shafts

print all shaker parts glue floor half's and shaker half's together
print all shaker spray parts glue spray parts according to diagram do not glue this assembly to the spray bar supports the spray bars just sit on top of this

glue spray bar supports do not glue these to the floor this just fits in the holes

insert 6 i Beam cross members through the motor blocks and motor rollers

insert 1 I Beam cross member though the shoot shaker

press fit 90deg I Beam connectors to the ends of all cross member I Beams do not glue

set 1 side frame down flat and glue one side of the 90 deg i beam connectors to the frame use a re posonable glue for the first fittings as you will be having to re-position a few times for fit i use multi-purpose cement that i found at walmart this stuff just holds realy well for a permanent fit and if nead be can be removed you can also use a hot glue gun this probably would work better if i had thought about this earlier i would have used the glue gun as it sets fast and hard

then glue the other side frame to the 90deg connectors

the shaker deck just slides on top to lock the back half's together and the front shoot just slides on to lock the front half's

glue the grizzly bars hinge to the side frame according to diagram

to use the water jets there is everything needed to connect these in the water pump folder using 1/2 in hose and 8mm id hoses and the ball valves are include so every thing is there all that neads to be done is to put them together ??

i do not have any place to use the water jets so cant completely test these each water bar has ben tested individually and that is all i can do if you do have a place to set this up with water please please please post a picture this would make my dreams come true with this thing

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.