Vontrol III Cats 1984 Matchbox - With Accessories

8/22/2018
Update - Added Sword and shield both objects would be best printed on DLP for most detail note that accessories will contain more detail then originals this is an artistic choice and are generally designed off of full scale props. The shield bubble can be printed but would be best done from a casting or simply blue tinted resin pour into the shield.

Update - I will be loading these all into fusion 360 to perform tolerance testing, as well as look into hardware replacing some of the plastic pegs due to strength issues, I will also refine some of the details to reflect the actual toys however each lion takes around 20-30 hours or work to replicate all the engravings and ensure functionality with parts. All future models will be made printable working replica of my personal originals.

1:1 scale replica lion parts for Matchbox Voltron cats, these parts will not work as replacement parts for existing models but I may do such if there is a demand. Pegs will need to be glued/set in place. Movement restriction is placed on the front legs as in the actual toys as well as re-pegged parts. The rounded top pegs are for the feet and others for the upper legs. Parts should print on most any printer with less clean up and separation required.

More part remixes to come.

Blue lion Details - Blue lion parts are currently non functioning that is to say it does not mimic the toy having issues with the separation of the body but I hope to upload a fully working version with raising back panel and head panel soon and back key to allow for eventual black lion to fit into it.

Red Lion - In Progress; being constructed from scratch.
Green Lion
Black Lion - In Progress: being constructed from scratch.
Yellow Lion

-