Skip to content

HANGING BIRDHOUSE BIRD FEEDER HOUSE, Bird bath. VOGELHÄUSCHEN MIT SITZSTANGE

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.3k views
  • 9 likes
  • 7 downloads
  • 1 collection
License
3D design format
STL Folder details Close
  • vogha_dach.stl
  • vogha_fuerstba.stl
  • vogha_schale.stl
  • vogha_stange.stl
  • vogha_wand.stl
  • vogha_waterbasin.stl

Learn more about the formats
Publication date 2021-05-12 at 18:30
Design number 425181
gema2

gema2

3D printer file info

3D model description

Vogelhäuschen mit 2x Sitzstangen, Futterhäuschen aufhängbar. Einfacher Aufbau. Supportfrei. Sie benötigen lediglich 16 Stück SPAX-Schrauben. 3,5 x12 oder 3,5 x 16 mm. Farbauswahl/-zusammenstellung nach Ihren Wünschen. Achtung, bitte Bohrungen eventl. nachbohren. Bohrungen sollten nicht kleiner als 0,5 mm des Schraubendurchmessers betragen, wg Rißgefahr.
Bonus: Sitzstange und Wasserbadschale.
Die Sitzstange hat keine Bohrungen und kann variabel von 25 bis 35 mm Abstand eingebaut werden. Bohrlöcher vorher anzeichnen und vorbohren.
Mit der Badeschale ohne Bohrungen, können Sie das Futterhäuschen in ein Vogelbad, oder/und Trinkstelle umwandeln. Die Badeschale ist ca. 36 mm hoch und kann max, 0,5Liter aufnehmen.

Bird house with 2 perches, bird feeder can be hunging up. Easy to assemble. Support-free. All you need are 16 SPAX screws. 3.5 x12 or 3.5 x 16 mm. Colour selection/composition according to your wishes. Attention, please re-drill the holes if necessary. Drill holes should not be smaller than 0.5 mm of the screw diameter because of the risk of cracking.
Bonus: perch and water bath bowl.
The perch has no holes and can be installed at variable distances from 25 to 35 mm. Mark and pre-drill the holes before mounting.
With the bath tray without holes, you can convert the bird feeder into a bird bath and/or drinking place. The bath bowl is approx. 36 mm high.

3D printing settings

no support, easy printing. ASA, PLA or PET-G. Teilewandungen ca. 2,2 bis 3 mm. Wall 2,2 up to 3 mm
Schalengröße: 160 x 140 x 22 mm
Dach: 190x130x2,2 mm; Seitenwand: 200x184x14 mm
Geeignet für Neulinge im 3D-Druck.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.