Axalon Main Terminal from Transformers Beast Wars

Adding on to the series of display pieces from within the Axalon - here comes the main computer terminal for our Maximal pals!

A fairly large piece, the terminal sports a ton of monitors and display screens which were used to guide the bots on their space (and now earth-bound) adventures!

The terminal is flanked by two massive pillar pieces, which do seem to also provide structural support to the ship itself. Have left all the screens in this piece unpainted for now but they can definitely be decorated with all sorts of fun terminal displays and status readouts.

Taking a closer look at the centre controls, there are the familiar handpads for control, and various buttons and guages. the left and right of the screen also sit the "mic" and "globe" (or is that a webcam?) of the terminal.

And, now for some shots with our stalwart band of Maximals too, here with Rhinox at the helm.

If you have the Axalon Main Computer Table (https://www.patreon.com/posts/47755886) from earlier also, it adds on nicely to the entire display.

=== ASSEMBLY ===

Though a fairly large piece, this Axalon Terminal pieces together in a straightforward way as shown in the attached diagram. All the parts peg together using 5mm pegs which can either be cut from acrylic rods, or using the 3d printed 5mm pegs which are provided in the fileset.

===

Also, this would display pretty nicely with the earlier CR chamber (https://www.patreon.com/posts/42747700) too so would love to see if anyone (with enough display space) sets up all the Axalon interior pieces together :)

As always, happy 3d printing this one!

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog