Clothes Hanger - Foldable

---------------------- Folding Hanger ----------------------

This Hanger is a simple solution for printing a complete and functional hanger in a standard 3D printer.

By printing the two parts that later you can easily assemble you will have, in less than 3h, a complete hanger with the size of a standard hanger: 400mm in length

The collapsable hanger makes it easy to insert from the top into clothes with a closed neck.

   ---------------------- How it Works ----------------------

The hanger is divided into two parts that can be joined using a click mechanism, the first one allows you to join the two parts together while allowing you to rotate them to place them on the clothes, and by attaching the second one, placed on the hook, the hanger remains fixed.

No additional supports required. Just slice and print!

Note: If you like this design check out the rest of my practical and fun designs! ☻

To fit properly in the bed, the models must be rotated 15º in the Z axis to fit the diagonal.

The "build plate adhesion type" option should be none or it would not fit.

Printer: Ender 3 Pro

Software: Cura

Supports: No

Resolution: Standard, 0.20mm

Infill: with PLA 20 - 25% is enough to ensure it is sufficiently strong

Post-Printing:

Just join the two parts as is shown in the pictures (2) and it will be ready for hanging.