Blood Bowl Player Skill and Status Ring (Old Version)

There's a new version of this here: https://cults3d.com/en/3d-model/game/blood-bowl-skills-ring-v2

This file allows you to keep track of your player skills, names and numbers.

In addition, you can use the 'arrow chevron' to show a player is yet to be used if facing the opponent's team, and 'no go' sign to show a player is already used when facing the opponent's team.

Underneath the players' skill and status ring are the words 'knocked down' and 'stunned' to represent the players' status when prone. There are steadying 'juts' to stop the model from rolling.

There is room for a 1x3mm magnet to accommodate other size bases, or for extra security on the base, but you can just push-fit 32mm bases.

You can scale down the files to 78.13% of the original size to fit 25mm bases.

Includes Alternative Base Rings

Files included are:

Main Ring STLs:
Skill Ring_Main.stl
Skill_Ring_Main_Supported.stl

Alt Ring STLs
Skill Ring_alt_NoAntiRoll.stl
Skill Ring_alt_NoIcons.stl
Skill Ring_alt_NoStatusText.stl
Skill Ring_alt_NoStatusText_NoIcons.stl
Skill Ring_alt_NoStatusText_NoIcons_NoAntiRoll.stl
Skill Ring_alt_prone_text.stl
Skill Ring_alt_prone_text_NoAntiRoll.stl
Skill Ring_alt_prone_text_noicons.stl

Skill Bands:
Skills.rar (All Skill Bands)
Skill_Band_Full_Blank.stl
Skill_Band_Half_Blank.stl
Skill_Band_Full_Blank_Supported.stl
Skill_Band_Half_Blank_Supported.stl

Watch here to preview the functionality of the ring: https://youtu.be/7ozRAXKTZjw

Watch here to see how to add text to blank plates for names or whatever you like: https://youtu.be/OpQF9EaxoB4

Printed on an Anycubic Mono SE:

Chitchubox settings:

Layer Height:0.05
Bottom Layer Count: 5
Exposure Time: 1.5
Bottom Exposure Time: 40
Light-off Delay:0.5
Bottom Light-off Delay: 0.5
Bottom Lift Distance: 6
Lifting Distance: 6
Bottom Lift Speed: 240 mm/min
Lifting Speed: 240 mm/min
Retract Speed: 240 mm/min

Resin: Anycubic Basic Grey
About 40 minute print.