Wire / rope tensioning device
148
views
0
downloads
0 comments
Loading comments...
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Wire / rope tensioning device
0
0
Add to Collection
Description
It is 3d printed device that can be used tighten the rope or to reduce the sagging of the rope/wire .
for better explanation you can watch the vedio -
https://drive.google.com/open?id=1R5z9oL-a6oCuEcfVPLPTheJ68ztnZp7Z
no nut bolt required to fix it
pros -
- cheap
- reduce the lenght of wire by 20 cm to 50 cm depending on the size you print
- easily adjustasble
License
Printing Details
printed with 100 % infill
layer height- 0.15 mm
noozle speed - 40 mm/s
Technical Information
Status | Rejected |
Time to do | - 240 minutes |
Material Quantity | 55 grams |
Dimensions | can be easily printed in 22*22*25 cm |
More Information