MK23 Carbine Kit Airsoft

This is the third iteration of my MK23 pistol carbine kit and what makes it so special, this one is a smaller, minimalist CQB style carbine kit that will help you get more from your airsoft pistol as a primary such as enhanced accuracy and thus range.

Now for the features:
- RAILS, lots of rails means you can attach lots of extras to this kit

• MINIMALIST, the stripped back design makes this pistol lighter and easier to manoeuvre in close environments and also shows off your pistol to the world

• STURDY DESIGN, this design is made in sections that glue together making it easier for smaller printers, however its still sturdy: each section can be connected by two bolts for extra strength and the whole model has a hollow tube running through it meaning you could put a metal rod through for even more strength should you wish.

• NOISE, the included barrel extension I have found enhances the noise of the pistol which for CQB can help with the fear factor or simply fill it with foam and you’ve got a suppressor

• SUPRESSOR COMPATIBE, if you don’t like my barrel extension, don’t glue it on and instead use an aftermarket suppressor, most should fit.

• TDC FRIENDLY, there is a hole in the rails where most TDC modifications would be located so you can still adjust it with your Allen key

This does require some self-assembly and joining through some adhesive materials so the results and overall strength of the design will vary on how it is assembled and also its usage but if it breaks the advantage of this kit is the whole model does not need replacing only the broken section.
This kit is intended for use on airsoft guns only and should not be modified, it fits my stti mk23.
I cannot give any guarantees on the end result as it requires self-assembly and there is of course always a difference between different printers and software used so the end product will always slightly vary in size shape and finish and different parts may require sanding scaling or filing.

-This kit contains multiple smaller models to print and then join together.
- I printed this in PETG with 4 perimeter shells, 4 bottom and top shells with supports and rafts to minimize warping all at 235 Celsius with 15% infill but I accept other printers have different capabilities, settings, software and usable material so results will vary