When I first started with our N-Track club I would keep all of my locomotives and cars in there original boxes. This made it take longer to setup and cleanup.
So the next thing that I did was take tackle box trays and line them with craft foam. I save all of the original boxes. And the tackle box trays were set up as cosises. But it was a problem removing the lids and get to the box that I wanted.
So after purchasing a 3D printer I deiced to 3D print trays with open tops. Didn't work out as planned. Could not print as big as I wanted and the trays were always warped.
So next try was to purchase trays and 3D print divider for them and line them with craft foam.
So this is how I setup the system to meet my needs.
Trays were set up to support conist.
I used a Brother Label Printer to print labels to put on the four sides of the trays.
You can stack up to 14 trays.
The top tray should be empty (or just paperwork)
A strap is use to protect the continence if they get tipped over.
If you are only taking a couple trays you need to use the shorter strap.
After you get the strap around the trays you can lower it into the carry bag.
I normally carry it by the handles and the strap just to be safe.
I started out printing boxes with five sides.
I found out it worked better to print four sided boxes.
If you face the opening towards the center it makes it twice as wide.
Them cut the craft foam to the full width.
I have also designed mini extensions to reduce warping.
They are also easier to cut off then the ones that the slicer makes.
Supplies:
Regal Pak ยฎ 6-Piece 1-Inch Deep White Full Size Plastic Stackable Jewelry Tray 14 3/4" X 8 1/4" X 1"H
https://www.amazon.com/dp/B00B7MCFE4?ref=ppx_pop_mob_ap_share
3D Solutech Real White 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)
https://www.amazon.com/dp/B00ME7E5X0?ref=ppx_pop_mob_ap_share
Heartfelt Creations Art Foam Paper 8.5"x11" 10/pkg, Hcfs1465
https://www.amazon.com/dp/B07B83RBGR?ref=ppx_pop_mob_ap_share
Craft Foam for full width Tray (Make sure to select 1mm)
EVA Foam Sheets for Kids Craft Cosplay Model 13.7"ร39" Thickness 1-10mm (High Density 79 kg/mยณ)
https://www.amazon.com/gp/product/B07BL27LZT/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Refill for Brother Label Printer
Label KINGDOM 6 Pack Replace TZe231 TZe Tapes 12mm 0.47 Inch Laminated White TZ231 Label Tape Compatible with Brother P-Touch Label Maker PT-D210 PT-D600 PT-2730VP PT-H100 PT-1880 PT-1010 PT-2300
https://www.amazon.com/gp/product/B01I0SD2VM/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Reusable Cinch Straps 2" x 60" - 6 Pack, Multipurpose Strong Gripping, Quality Hook and Loop Securing Straps (Black) [For tall stacks]
https://www.amazon.com/dp/B01G4IVO0Q?ref=ppx_pop_mob_ap_share
Reusable Cinch Straps 2" x 40" - 6 Pack, Multipurpose Strong Gripping, Quality Hook and Loop Securing Straps (Black) [For short stacks]
https://www.amazon.com/dp/B01G4IVN4S?ref=ppx_pop_mob_ap_share
Reusable Grocery Tote Bags (6 Pack, Black) - Hold 44+ lbs - Large & Durable, Heavy Duty Shopping Totes - Grocery Bag with Reinforced Handles, Thick Plastic Support Bottom
https://www.amazon.com/dp/B07C76HTN6?ref=ppx_pop_mob_ap_share
Tools:
da Vinci Mini Wireless 3D Printer-6"x6"x6" Volume (Includes: 300g Filament, PLA/Tough PLA/PETG) - Upgradable to print Metallic/Carbon PLA
https://www.amazon.com/dp/B07D3FCKH1?ref=ppx_pop_mob_ap_share
Da Vinci Jr NFC Unlock Pro (Android Play Store)
Used so that you can reset Da Vinci tags so that you can use cheaper filament.
LokBuild 3D Print Build Surface, sticky back sheet, quick, clean removal of printed parts, versatile (TWIN PACK 8" (203x203mm))
https://www.amazon.com/dp/B075DDR9F1?ref=ppx_pop_mob_ap_share
Paper Cutter to cut foam
Fellowes Atom 180 Trimmer (5410702)
https://www.amazon.com/gp/product/B001MJ0HSS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Brother Label Printer
DYMO Label Maker | LabelManager 160 Portable Label Maker, Easy-to-Use, One-Touch Smart Keys, QWERTY Keyboard, Large Display, for Home & Office Organization
https://www.amazon.com/DYMO-LabelManager-Handheld-Label-1790415/dp/B005X9VZ70/ref=sr_1_34?keywords=brother+label+printer&qid=1575684096&sr=8-34
Dividers:
Five High x Three Wide
Five High X Three Wide (Center)
Four High X Three Wide
Five High x Four Wide
Four High X Four Wide
Ten High X One Wide
96.875x35.88x20xSB(12).stl
These are files that I have not had the time to sort through.
Hopefully I will get this undated before Christmas.
Guides:
Cutting Guard (37.75)