Airsoft Silencer Suppressor for M4 Ar15 Birdcage Flash hiders (no supports, one piece!))

One piece suppressor silencer for Airsoft birdcage flashiders. ONLY FOR AIRSOFT TOYS!

With this suppressor your AEG will become more silent! You can add or remove the suppressor in only 15 seconds..

You need only nr.2 TSEI M5x20 screws and Nr.2 M5 self- locking nuts (or non locking as you wants..). This screw will block the suppressor on your gun cause they will push on the 2 rear flat parts of birdcage flash hiders.

You need to insert the 2 nuts inside the 2 prearranged holes. It seems to be a narrow hole but instead is perfect for M5 nuts, you need only to use this technique: do a correct alignment of the nut with the hole shape and then while tightening the screw, the nut will be pulled in.

Here you will find 4 different files so you can choose the correct one for your rifle cause Bird cage Flash hiders have slightly different diameters brand by brand (my Specna arms differs from my old King Arms). You need to check with a caliper the external diameter of your birdcage flashhider to print the correct file..

Suppressor hole diameters:
-File "VERSION A"= 22,0 mm (my SpecnaArms..but check yours)
-File "VERSION B"= 22,5 mm
-File "VERSION C"= 21,5 mm (my King Arms..but check yours!)
-File "VERSION D"= 21,8 mm

NO SUPPORTS!! BUT PLACE THE PART CORRECTLY WITH THE "EXIT BULLET" FACE ON THE BED (see attached picture).. so you can print without supports!!

PLA
0,2 mm QUALITY
50% infill
37 meters of filament
NO SUPPORTS! BUT PLACE THE PART CORRECTLY WITH THE "EXIT BULLET" FACE ON THE BED (see attached picture).. so you can print without supports!!