Modular parts storage ULTRA 1000+ collection

Over 1,000 files covering a wide combinations of shape, size and configurations.

If you find these useful and are in a position to buy me a coffee I would appreciate it. I lost a lot of weekends to designing this system.

https://ko-fi.com/andyvandam

Create your own perfect modular storage, no more sliding around and falling over when you close the drawers. See exactly what you have at a glance with clearly labelled tubs and make organising all of your parts a breeze!

Three different pitches:
30 - 40 - 50
and over 300 different combinations of layout & height for each pitch. If you cant find the perfect container shape here, then it probably doesn't exist!

All pitches have a selection of grids layouts you can maximise the grid in the bottom of your drawers or shelves. Keeping everything perfectly aligned and exactly where you left them for next time.

The slight taper to the tubs makes it easy to insert and remove them from among each other. So you can bring the parts to you when you're working on your project. Or re-arrange them as your collection of parts and tools grows.

Tubs
+++++++
There are multiple shapes and they are all a sizes based on the pitch you choose.
Giving you the ultimate flexibility in sizing your storage needs.
Small little parts, a 1x1 will make them easy to handle.
Long and skinny? use a 1x6.
Big & square? use a 5x5.
Want to store something really large? the sizing goes up to 10x10 for those with monster printers!

Each tub has a place for a label.
All of the label holders are sized to suit Dymo 3/8" [9.5mm] labels, making it easy to
make nice clean labels for all of your parts
The label holder with either be on the 'long' or 'short' side.
Again, this allows you to make your labels readable from whatever orientation you have planned

Grids
+++++++
The grids follow the same format, so you can maximize your layout.
With vertical edges, its trivial to layout multiple grids next to each other and cover a whole surface.
Or mix and match the grid spacing, big containers up the back and smaller ones at the front.

Heights
++++++
Each grid also comes in three different heights:
30mm
50mm
75mm
Mix and match the heights on your grid, or keep the uniform. Whatever suits your needs
this kit is all about giving you the flexibility to decide.

Printing
+++++++
Walls are 1.3mm thick and best printed solid.
PLA, ABS, PETG. The choice is yours.
Overhangs are 45 degrees and the grid has a forgiving tolerance to the tubs so you can print without supports.

If you have a stock 0.4mm nozzle, consider setting your extrusion width to 0.65mm for a significant speed boost