Stream Deck Mount for Razer Blackwidow TE Chroma v2

Overview

Updated: The design has been adjusted to tilt back the stream deck slightly for more stability, especially when using the keyboard feet. I've also increased the height of the "tab" on the support to better grip the keyboard.

I wanted a tidy Stream Deck mount for my beloved Razer Blackwidow keyboard that wouldn't move about. This will work with other Razer keyboards that have the same profile and maybe a few others.

The model is available on TinkerCAD: https://www.tinkercad.com/things/bIz7shAX9cE-dazzling-bruticus and is in 2 pieces to allow modification for other keyboards and printing with minimal supports. There are 3 files:

• Combined - Stream Deck Razer Blackwidow TE Chroma v2 Mount.stl is a combined model that you can split yourself
• Support_-_Stream_Deck_Razer_Blackwidow_TE_Chroma_v2_Mount.stl is the part which clips to the keyboard and supports the frame
• Frame_-_Stream_Deck_Razer_Blackwidow_TE_Chroma_v2_Mount.stl is the part which holds the Stream Deck

Printing Instructions

I printed this in PLA, other materials should work. ABS may shrink a bit, YMMV. Print the frame "face down" with ~5mm brim. You may wish to "paint" supports on the overhangs of the truss supports. Print the support without supports (chuckle) with the largest flat surface down (facing your print bed). The support should not need a brim.

Assembly

You may need to trim, file or smooth the ends of the trusses on the frame to fit into the support slots. I applied a few drops of cyanoacrylate (CA) glue to the slots on the support and along the groove on the edge of the frame that joins to the support. Once dry, it will clip nicely above the function keys on your keyboard. The Stream Deck can be inserted sideways on an angle from the back of the frame.

Modification For Other Keyboards

You should be able to tweak the support to fit other keyboards. If you use TinkerCAD, ungroup the support and tweak the depth of the top or angle of the back as needed. Changing the angle of the back may change the angle of the frame. Acknowledgement for remixes and modifications is appreciated.

-