Pencil Holder

ENG

Hi, I created this object to store my colored pencils (Diam 7.5mm max) according to their numbers or a panel of colors. 1 rack contains 50 pencils ((5x5) x2).

3 parts: the base, the legs and the rack

With this object you find the right pencil in 1 sec and never lose any pencil.

Put your pencils in safety and in value thanks to my design.

Dimensions assembly: (L x W x H ) 169 x 89 x 110 mm

EN

Hi, I created this object to store my Diam 7.5mm max colored pencils according to their numbers or a panel of colors.

1 rack contains 50 pencils ((5x5)x2).

3 parts: base, legs and rack.

With this item, you find the right pencil in 1 sec and lose none.

Keep your pencils safe and secure with my design

ENG

no support, 0.20 to 0.28 layer high, needle 205 ° C, Bed 65 ° C, infill 12% cubic overlap 30%, speed 40mm/sec.

Always place the large face on the bed, watch the 1st layer.

test the legs with the 8mm hole before assembly.

Print the large pieces one by one.

Put a sponge or bubble wrap in the base to protect the mines.

EN

no support, layer thickness 0.20 to 0.28, 205°C, bed 65°C, infill 12% cubic overlap 30%, speed 40mm.

Always the large side on the bed, watch the 1st layer.

Test the legs with the 8mm hole before assembly.

Print the big pieces one by one.

Put a sponge or bubble wrap in the base to protect the leads.